Global LED manufacturer Seoul Semiconductor has released the Acrich2 LED module for intelligent LED lighting systems, which is the result of a combination of LED and IT cutting-edge technologies. Figure 1: Comparison of lighting systems using Acrich2 modules with DC LED module lighting systems As a result, Acrich2 brings a number of advantages to LED lighting systems that extend system life, reduce cost by 10%, and improve reliability by reducing the number of unnecessary components that lead to shortened life and various types of problems. Figure 2: Acrich2 LED Module According to Marten Willemsen, director of global marketing for Seoul Semiconductors, “just as smartphones are a combination of multiple functions, the Acrich2 module with Acrich2 IC technology has unlimited potential, it can be applied to smart lighting without any additional components, and according to the trend Improved functionality. As a result, the Acrich2 module is expected to be the manufacturing standard for high efficiency and high reliability intelligent lighting systems." (This article is submitted by Seoul Semiconductor)
The design of the terminal blocks with clamping yoke connections which has contact pressure and has with self-locking function.Providing test type,knife Disconnect,fuse type terminal blocks etc.The cross-sectional is 0.5-35mm².
Marker Carrier For Terminal,Screw Connection End Stopper,Terminal Block End Stopper,Terminal Connection End Clip Wonke Electric CO.,Ltd. , https://www.wkdq-electric.com
The so-called intelligent lighting system refers to a system that does not need to manually control the brightness adjustment, but can be remotely controlled by a smart phone through WIFI, 3G and LTE communication networks. If the Acrich2 module is used for intelligent building and house management, it is possible to control the lighting system from the cell or floor. And its new function allows the lighting controller to receive signals through the light sensor and motion control sensors, which can be applied to intelligent lighting in parking lots and plantation cultivation systems.
In order to control the on/off and brightness of the illumination, conventional DC LED illumination systems require an additional brightness adjustment switch and an AC to DC converter. The Acrich2 released by Seoul Semiconductor can receive signals from the brightness adjustment switch without any converter, making the design of the LED lighting system a breeze. 
