Model NO.: M30
Trademark: HJSi
Transport Package: 10
Specification: 30X26X16
Origin: Zhejiang
HS Code: 853890000

Product Description

HJSi Waterproof IP68 Stainless Steel 201 304 316 316L Cable Gland .
Material: Body:SUS304/SUS316 ,Seal:Polyamide
Sealing:Modified rubber
Protection degree: Within the clamping range,and the use of O
 sealing ring screw tight head ,its protection degree can reach IP68.
Operating temperature: Static condition: -40ºC to 120ºC, short-time150ºC.
Product Characteristics:special design of the clamp and seals, extremely easy installation, suit for wide range of cable, strong stretching resistance, waterproof, dust proof, resist to salt, acid, alcohol, grease and other solvent.
Applications:Waterproof cable connector cable accessory
products,joint can access equipment box,can also according to the electric equipment selection of thread access import and export for internal thread.alkali proof demanded devicess ,machines and equipment 
Metal Waterproof IP68 Brass EMC Anti-Magnet Type Cable Gland
Metal Waterproof IP68 Brass EMC Anti-Magnet Type Cable Gland
Thread Item.No. Cable Range Thread O.D. Thread Length Spanner Size Std.Pkg
        AG Ф(mm) C1(mm) GL(mm) A&F(mm) (pcs)
M8 x1.25 HJS- M8-4 2-5 8 6 12 100
M10x1.5 HJS -M10-6.5 3-6.5 10 7 15/14 50
M12x1.5 HJS -M12-6 3-6.5 12 7 18/14 50
HJS -M12-8 4-8 12 7 18/19 50
M14X1.5 HJS-M14-8 4-8 12 7 19/18 50
M16x1.5 HJS -M16S-8 4-8 16 7 21/19 50
HJS -M16L-10 5-10 16 7 21/22 50
M18x1.5 HJS -M18-10 5-10 18 8 21/22 50
HJS -M18-12 6-12 18 8 24/22 50
HJS -M18L-10 5-10 18 8 21/22 50
HJS -M18L-12 6-12 18 8 24/22 50
M20x1.5 HJS-M20S-12 6-12 20 8 22/24 50
HJS -M20-14 9-14 20 8 24/27 50
HJS -M20L-11 7-12 20 8 22/24 50
HJS-M20L-14 9-14 20 8 24/27 50
M22x1.5 HJS -M22S-14 9-14 25 8.5 24/27 50
M25x1.5 HJS -M25-14 9-14 25 9 27/30 50
HJS -M25-16 11-16 25 9 30/32 50
HJS -M25-18 13-18 25 9 30/32 50
HJS -M25L-18 13-18 25 13 30/32 50
M27x1.5 HJS-M27-18 13-18 25 10 30/32 50
M28x1.5 HJS-M28-18 13-18 25 10 30/32 50
M32x1.5 HJS-M32S-18 13-18 32 10 36/34 20
M32x1.5 HJS -M32-22 15-22 32 11 36/38 20
M36x1.5 HJS-M36-22 15-22 36 11 38/40 20
HJS-M36-25 17-25 36 11 40/42 20
M40x1.5 HJS-M40-26.5 18-25 40 12 40/45 10
HJS -M40-31 23-32 40 12 45/46 10
M50x1.5 HJS -M50-38 32-38 50 12 55/55 10
HJS -M50-41 31-41 50 12 57/60 10
M63x1.5 HJS -M63-41 31-41 63 13 66/70 10
HJS -M63-44 35-44 63 15 66/70 10


 

2.4G Router Module

What is 2.4g wireless module?
2.4g line module operating frequency in the range of 24400-2484mhz, can communicate through the scanning protocol, air rate up to 1Mbps, output power up to +4dBm, the module has the advantages of low power consumption, cost-effective. Movingcomm's current 2.4g antenna modules are: IOT04, IOT05, IOT09, IOT18, IOT60, etc. Users can choose a variety of modules with a transmission distance of 50-500 meters according to cost considerations.

Second, the role of 2.4g wireless module
Function 1, for the formation of a star topology wireless communication network, and must be a multi-point star topology, some extraordinary places need wireless communication. On the one hand, the transmitting and receiving module is cheap, and the cost of forming the star topology is relatively low. On the other hand, the transmitting and receiving module can adopt the modular design, which is small in size, easy to use and easy to integrate. For the wireless network with low communication speed and close distance, the transmitting and receiving module is very practical.

Function 2, for wireless multi-channel (parallel) control. Such as complex remote-controlled robots, some places require multi-channel (parallel) control. One method is to use the receiving module to directly connect to the decoder, and then connect to the relays and other electronic components to drive the subsequent controlled object; the other method is to use the receiving module to connect to the single chip microcomputer, and after the data is disposed of, the single chip microcomputer is connected to the relays and other electronic components to drive the subsequent controlled object. Usually a pair of transmitting and receiving modules can achieve up to six parallel wireless control, if the required number of channels is greater than six, you can use multiple pairs of transmitting and receiving modules, and work at the same time to meet the actual needs.

Function 3, used for general serial port, RS232 antenna data transmission, there are usually many control instruments and equipment using serial port, and communication with these devices must meet the requirements of serial port. In some extraordinary places, when the industrial control site must use the antenna transmission mode, it is natural to choose the transmitting and receiving modules mentioned in this article, but it must be explained here that to use this communication mode, the corresponding software must be prepared at the transmitting end and the receiving end respectively to achieve the conversion of file formats, in order to achieve the purpose of wireless communication, if the communication system is full-duplex. It can be achieved by using two pairs of transmitting and receiving modules, working simultaneously.

Third, 2.4g wireless module application field
2.4G wireless module is widely used in wireless health sports products, wireless mouse and keyboard, product information push, wireless remote sensing, wireless ranging system, alarm security system, smart home, toy control, tire pressure monitoring and other fields. With the 2.4G wireless module, all the whole house wireless smart home can be linked together, you can control all the smart home devices through the link of the network, and then you can control the switch of all the whole house wireless home, adjust the brightness of the lamp, adjust the rise and fall of the curtain, etc., through the continuous innovation of technology, The whole house wireless smart home can be controlled by a small white robot voice, can be controlled by a smart scene panel, can be controlled by sensors and so on.

Four, 2.4g wireless module how to choose antenna
In general, the 2.4g wireless module requires an impedance of 50 ohms, a red wire used with 2.4g, a 2.4g folded rod antenna, a 2.4g gold-plated straight head rod antenna, a 2.4g gold-plated elbow rod antenna, and a 2.4g small suction cup antenna. These antennas are special antennas designed for 2.4g wireless communication system, antenna standing wave ratio performance is good, small size, clever structure, easy installation, stable performance, with good anti-vibration and aging ability.

2.4G Router Module,M2 Wifi Module,2.4 Ghz Wifi Module,Mini Wifi Module

Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommiot.com