-
Model NO.: 4*95mm2 4*120mm2
-
Conductor Type: Stranded
-
Conductor Material: Copper
-
Insulation Material: PVC
-
Range of Application: Mine
-
Brand: Huatong
-
Factory Area: 100000mm2
-
Color: Black, Red
-
Transport Package: Wood Drum or Steel- Wood Drum
-
Origin: China
-
Type: Insulated
-
Application: Underground
-
Sheath Material: PVC
-
Material Shape: Round Wire
-
Certification: ISO9001, CCC
-
Standard: IEC 60502
-
QC: 25
-
Trademark: Huatong
-
Specification: Power Cable
-
HS Code: 8544601200
 3.6-6kv, 26-35kv GSWA/DSTA Armour XLPE Insulated Power Cable    (1)Production capacity:5000km/month
  (2)MOQ:1km
  (3)Delivery:5~15 officail days.
  (4)Standards:IEC,ASTM,DIN,BS; or according to customers' requirements.
Specification
1. Conductors: copper or aluminum.
 2. Both armored and non-armored type power cables are available.
 3. Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.
 4. PVC or XLPE sheathed.
 5. Number of cable cores: one core (Single core),two cores(Double cores),three cores,
   Four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core),
      Five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
  6. Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.
Characteristics of Cable
 1.Max Long-time operating temperature of PVC insulated cable is 70°C,XLPE 90°C
 2.Installing temperature of cable should not be less than 0°C
 3.Max short-circuit temperature is:PVC not exceed 160°C,XLPE 250°C,Not more than5 Sec.
 4.Permitting bending radius cable: Not less than 10 D times (D:external diameter of cable)
 5.Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.
Number of Cores & Nominal Cross-section Area
| Number of Cores |
1 |
2 |
3 |
3+1 |
4 |
3+2 |
4+1 |
5 |
| Section Area (mm2) |
4 - 500 |
2.5 - 500 |
2.5 - 300 |
4 - 300 |
2.5 - 300 |
2.5 -300 |
4 - 300 |
2.5 - 95 |
1. The installation temperature should not over 20ºC, If the ambient temperature is lower than 0ºC, the cable should be preheated.
2. The bending radius of cable should not less than 8 times.
3. After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.
In air:
1. As the single core cable laying in parallel, the distance between the cable's center is 2 times (for cables which cross section area of conductor ≤185mm2) and
90mm (for cables which cross sectional area of conductor≥240mm2)
2. Ambient temperature: 30ºC
3. Max. temperature of conductor: 70ºC
4. Rating factors of current rating for ambient temperature:
| Air temperature |
20ºC |
25ºC |
35ºC |
40ºC |
45ºC |
| Rating factors |
1.12 |
1.06 |
0.94 |
0.87 |
0.79 |
1. When the single core cables are installed separately, the distance between the cable's center is 2 times of the cable diameter.
2. Ambient temperature: 25ºC.
3. Max. temperature of conductor: 70ºC.
4. Soil thermour resistivity: 1.0ºC. m/w.
5. Depth: 0.7m
6. Rating factors under different ambient temp.:
| Air temperature |
15ºC |
20ºC |
30ºC |
35ºC |
| Rating factors |
1.11 |
1.05 |
0.94 |
0.88 |
Â
Item |
Category    A ,B |
3.6/6kV |
6/10kV |
8.7/15kV |
12/20kV |
18/30kV |
21/35kV |
Category    A ,B |
6/6kV |
8.7/10kV |
12/15kV |
18/20kV |
- |
26/35kV |
Single core |
mm2 |
25-1200 |
25-1200 |
35-1200 |
50-1200 |
50-1200 |
50-1200 |
Three core |
mm2 |
25-400 |
25-400 |
35-400 |
50-400 |
50-400 |
50-400 |
Type |
Designation |
Applications |
YJV |
Copper conductor,XLPE insulated,PVC sheathed
 power cable |
For laying indoors,in tunnel or cable
 trench,unable to bear externalÂ
mechanical forces.Single core cableÂ
is not allowed to laid in magnetic duct. |
YJLV |
Aluminum conductor,XLPE insulated,PVCÂ
sheathed power cable |
YJY |
Copper conductor, XLPE insulated,PE sheathed
 power cable |
YJLY |
Aluminum conductor, XLPE insulated,PEÂ
sheathed power cable |
YJV22 |
Copper conductor,XLPE insulated,steel tapeÂ
armoured,PVC sheathed power cable |
For laying indoors,in tunnel in cable
 trench,or direct in ground,able toÂ
bear external mechanicalÂ
forces.Single core cable is notÂ
allowed to laid in magnetic duct. |
YJLV22 |
Aluminum conductor,XLPE insulated,steel tape
 armoured,PVC sheathed power cable |
YJV23 |
Copper conductor,XLPE insulated,steel tapeÂ
armoured,PE sheathed power cable |
YJLV23 |
Aluminum conductor,XLPE insulated,steel tape
 armoured,PE sheathed power cable |
YJV32 |
Copper conductor,XLPE insulated,steel wireÂ
armoured,PVC sheathed power cable |
For laying indoors,in tunnel cableÂ
trench,well or direct in ground,able to
 bear external mechanical forces and
 certain pulling force. |
YJLV32 |
Aluminum conductor,XLPE insulated,steel wire
 armoured,PVC sheathed power cable |
YJV33 |
Copper conductor,XLPE insulated,steel wireÂ
armoured,PE sheathed power cable |
YJLV33 |
Aluminum conductor,XLPE insulated,steel wire
 armoured,PE sheathed power cab |
Hotel projector
The hotel projector is a smart projector developed according to the accommodation habits of young people.
As long as the merchant installs the projector, the projector room can be launched to provide the guests with super cool
The perfect movie viewing experience, so that the hotel can not only meet the needs of consumers for accommodation, but also achieve
Movie viewing, entertainment and many other needs.
Projectors used in hotels usually have the following characteristics:
1. The picture is clear and high resolution;
2. The operation is convenient and easy to understand;
3. The sound is loud and the noise is low;
4. The film source is sufficient, and the screen can be projected on the mobile phone;
5. On this basis, the requirements of screen brightness and intelligent system can also be increased.
projector for hotel,hotel laser projector,hotel with projector,projector for hotel,hotel in projector
Shenzhen Happybate Trading Co.,LTD , https://www.happybateprojectors.com