What is the rail terminal used for? What are the characteristics? Let's take a look at it with Xiaobian. The rail terminal terminals are the terminals of the NC series, and the rail terminals are also called track terminals. The NC series combination terminal block adopts frame screw connection structure and is designed to meet the standards of IEC60947-1 and national standard 14048. It is suitable for the connection of round copper wires without special processing or crimping of the tubular end. The use of crimping and a unique threaded self-locking design make the wiring connection reliable and safe. The series of terminal blocks are beautiful in design and can be equipped with a variety of accessories, such as shorting bars, marking strips, baffles, etc. What are the characteristics of the rail terminal? 1. The terminal has a universal mounting foot and can be mounted on the U-rail NC 35 and the G-rail NC32. 2. Closed screw guide holes ensure the ideal screwdriver operation. 3. Terminals with multiple cross-sections are equipped with uniform accessories such as end plates, grouping partitions, etc. 4. Potential distribution can be achieved by a fixed bridge in the center of the access terminal or an edge-inserted bridge inserted into the line cavity. 5. The grounding terminal and the N-line slider breaking terminal that conform to the shape of the ordinary terminal. 6. Using the identification system ZT, unified identification can be achieved. 7. The graphics enhance the stereoscopic sense of the wiring system. Electrostatic Precipitator Transformer Electrostatic precipitator transformer, silicon rectifier transformer, high-voltage electrostatic precipitator rectifier transformer, high impedance transformer Henan New Electric Power Co.,Ltd. , https://www.newelectricpower.com
Electrostatic precipitator transformer is the main component of rectifier equipment for high-voltage electrostatic precipitator. According to the different requirements of working conditions, mechanical devices such as electrodes are selected, matched with high and low voltage electrical automatic control systems (i.e. the first part of equipment and the second part of equipment), and controlled and adjusted by them, which can be widely used in industries such as dust removal, demisting, desulfurization, dehydration, impurity separation and recovery of rare metals and other raw materials. The electrostatic precipitator transformer is mainly composed of two parts, one single-phase rectifier transformer and one bridge rectifier. When they are assembled in the same oil tank, they are called platform type, and when they are separately assembled in different oil tanks, they are called split type. There are two types of combined type: indoor type and exterior type, while there is only one type of split type: indoor type. The transformer itself is a high impedance transformer. High voltage silicon stack adopts avalanche high voltage silicon stack, which has strong impact resistance and can recover automatically after reverse breakdown. The high-voltage AC terminal of the transformer and the high-voltage silicon stack adopt the full bridge connection mode.