In recent years, with the advent of the lighting replacement period and the rapid development of LED technology, LED lighting has gradually become a new trend in residential lighting and commercial lighting. In China, LED lighting is replacing incandescent, halogen and fluorescent lighting systems. Many factors are driving demand for LEDs, such as legislation to reduce electricity consumption, improve energy efficiency, and reduce greenhouse gas emissions. Guangdong Province issued 58 local standards involving 11 LED lighting In July this year, 58 local standards of Guangdong Province approved by the Guangdong Provincial Quality Supervision Bureau were officially implemented, including 11 LED lighting industries, including elevator lighting developed by Jiangmen Junda Optoelectronics Technology Co., Ltd., a company in Jiangmen High-tech Zone. The LED lighting design standard (No. DB44/T1336-2014) is the first time in the province and even the whole country. It is reported that LED lighting design standards for elevator lighting stipulate lighting standard value, quality, energy saving evaluation, lighting power supply and power distribution indicators, suitable for DC power of rated voltage below 250V and AC below 1000V, can be widely used in office buildings, commercial residential buildings, Lighting systems for passenger elevators and cargo elevators in public places such as shopping malls, stations, subways, and airports. LED explosion-proof lighting related standards landing In July, the National Standards Commission launched three LED explosion-proof lamp standards development plan, aiming at standardizing the market, guiding the industry and promoting innovation in the fields of intelligent lighting control, application interface specifications and accelerated detection methods for LED explosion-proof lamps through the formulation of technical standards. . In the international arena, the Zhaga Alliance announced the LED explosion-proof lighting engine interface specifications Book7 and Book8. The new energy efficiency standard for LED explosion-proof lamps developed by the European Union was officially implemented in March 2014. The new products of the LED explosion-proof lamps for sale are mandatory to be labeled with energy. 4 LED lighting industry standards introduced The Semiconductor Lighting Technology Evaluation Alliance and the China Semiconductor Lighting/LED Industry and Application Alliance released four LED lighting industries in April, including LED safety requirements, performance requirements, and non-directional self-ballasted LED lamp specifications and performance requirements. standard. Among them, "Specification Classification of Non-directional Self-ballasted LED Lamps for General Lighting" has been adopted as an important basic standard for the semiconductor lighting industry and has been adopted by the International Electrotechnical Commission of the authoritative international standards organization. This classification standard proposed for the first time in the world to use the "lumen" to indicate the lighting effect, instead of the traditional "tile", as a new concept of dividing the specifications of LED lamps, it can better reflect the characteristics and advantages of LED lamps with high efficiency and energy saving. LED driver power supply has been included in the 3C compulsory certification category since September The National Certification and Accreditation Administration, in conjunction with the implementation experience of the pilot certification implementation rules, comprehensively carried out the adjustment and revision of the specific product compulsory certification implementation rules, in which the LED driver power supply was included in the scope of 3C compulsory certification, and will be implemented from September 1. Regional standards are not left behind In view of the fact that national LED standards have not yet been fully covered, many regions in China have begun to work or have developed LED product standards applicable to industries in certain regions. At the end of March this year, a LED company in Jiangxi adopted the Guangdong LED standard and released new technologies and new products for “de-lighting LED standard optical componentsâ€. In terms of standard setting, Quanzhou LED industry is not far behind, and this work was launched in June this year. Recently, the Institute of Optoelectronics established a standardization research office, and the Quanzhou Standardization Association will work together to develop a Quanzhou LED local quality standard system. Lighting standards are becoming clearer. The market will show standardized development in the next three years. The lack of LED standards has been criticized and has adversely affected the healthy development of the industry. Many industry insiders believe that this is because the development of LED lighting is not mature enough and many aspects are developing. With the gradual improvement and stability of technology, this It is more timely to introduce the corresponding standards. In this regard, Ye Jianbo, general manager of Hangzhou Zhongheng Paiwei Power Co., Ltd. said: “The development time of LED lights is relatively short, and there are technical breakthroughs every year. Many standards apply this year, and will not work next year. This is also an important reason for the lack of standards. In addition, different enterprise technologies are not the same as the standard understanding, which also has an impact on the standard inconsistency." For the standardization of the lighting industry, the president of Jingke Electronics (Guangzhou) Co., Ltd., Song Dong, also shared his opinion. There is no standard in the LED lighting industry in the early stage, because many opinions and practices in the industry are not uniform. However, since 2007, LED standards have been slowly programmed, and everyone is following this rule in the field of LED lighting. Only by standardizing things can we grow and develop and survive for a long time. Through the precipitation in recent years, the industry has achieved consensus in the module of light source, especially many well-known brands are tending to standardize. In the future, small and medium-sized enterprises in the industry will gradually standardize, only standards can Get popular. At the same time, Song Dong said: "I personally think that the longest time is three years. All products will become standardized. LED lighting has experienced almost 10 years from 2005 to now, which has precipitated a lot of technology, we believe In 2017, all products in the LED lighting industry must be standardized."
Qiuck deatail:
Application:
Movie theaters, clubs, stages.
Video processor,controller,video controller Guangzhou Chengwen Photoelectric Technology co.,ltd , https://www.cwstagelight.com
Other Hardware Features
* Business Organizations:
Supermarket, large-scale shopping malls, star-rated hotels, travel agencies
* Financial Organizations:
Banks, insurance companies, post offices, hospital, schools
* Public Places:
Subway, airports, stations, parks, exhibition halls, stadiums, museums, commercial buildings, meeting rooms
* Entertainments: