Delete according to the official website, the environment is centos 6.5 Note that the command is executed during the installation process. Sudo gitlab-ctl reconfigure An error occurred, modify the domain name in /etc/gitlab/gitlab.rb and execute it again before it can be successfully started. Go to page prompt 502, use the command Sudo gitlab-ctl tail postgresql View hints that the memory is insufficient, the official is also recommended to build 1g memory, 512m can also be installed but to add swap, or it will prompt insufficient memory after booting, I am currently 512, add swap after successful access, but a little slow, maybe still Rose to 1g. The above picture is my current configuration, note that this changes the default repository storage path of gitlab. Storing Git data in an alternaTIve directory I posted it here for everyone to see. # Prevent users from wriTIng to the repositories while you move them. Sudogitlab-ctl stop # Only move 'repositories'; 'gitlab-satellites' will be recreated # automaTIcally. Note there is _no_ slash behind 'repositories', but there _is_ a # slash behind 'git-data'. Sudorsync -av /var/opt/gitlab/git-data/repositories /mnt/nas/git-data/ # Fix permissions if necessary Sudogitlab-ctl reconfigure # Double-check directory layout in /mnt/nas/git-data. Expected output: # gitlab-satellites repositories Sudols /mnt/nas/git-data/ # Done! Start GitLab and verify that you can browse through the repositories in # the web interface. Sudogitlab-ctl start You can see that this is the path to some files and data in gitlab after the installation is complete. I saw a lot of information on the Internet is not right, it may be out of date, so gitlab suggested that everyone is still based on the official website, maybe you are obsolete when you read this article. Omnibus-gitlab uses four different directories. /opt/gitlab holds applicaTIon code for GitLab and its dependencies. /var/opt/gitlab holds application data and configuration files that gitlab-ctl reconfigure writes to. /etc/gitlab holds configuration files for omnibus-gitlab. These are the only files that you should ever have to edit manually. /var/log/gitlab contains all log data generated by components of omnibus-gitlab. Try to use when there is an error Sudo gitlab-ctl tail Check the log analysis error reason, I also tried to configure the mail for a long time before using it. Next we will configure the mail, I use SMTP here, use Tencent Enterprise Mailbox Or modify the /etc/gitlab/gitlab.rb configuration file to remind again that many articles on the web can be out of date. Gitlab_rails['smtp_enable'] = true gitlab_rails['smtp_address'] = "smtp.exmail.qq.com" gitlab_rails['smtp_port'] = 25 gitlab_rails['smtp_user_name'] = "" gitlab_rails['smtp_password'] = "password " gitlab_rails['smtp_domain'] = "exmail.qq.com" gitlab_rails['smtp_authentication'] = "login" gitlab_rails['smtp_enable_starttls_auto'] = true gitlab_rails['gitlab_email_from'] = '' ##Modify the sender of the gitlab configuration User["git_user_email"] = "" But gitlab does not seem to use ssl, gitlab tutorial did not find whether to enable ssl configuration, I did not go deeper, so the port number was changed to 25, the mail was sent successfully. When you test the email, you can use the forgotten password to send the email test, and then use gitlab-ctl tail to view it. After about 1 minute, you can see the log of the email. If you make a mistake, analyze the reason.
Ferrite is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies. Therefore, unlike other magnetic components, ferrite can be used at considerably high frequencies.
We are professional in manufacturing high quality ferrite cores.
OUR company's leading products consist of Mn-Zn ferrite power series, including PC4 PC44 PC95, etc. and high-permeability material series H5K, H7K, H10K, H12K and H15K, etc. The product standard is executed in compliance with the international general standard, national standard and ISO9001 quality system.
Advantages:
1.Core material: PC40/ PC44 /PC95/H5K /H7K/ H10K/H12K and H15K
2.Features:High-frequency
3.Core cost:relatively low
4.Other tpye:EE, EEL, EI,EC,EF,EFD,ETD,EPC,PQ,RM,UU,EDR,EPC,
ET,EM,GU,POT,UF,UYF,FERRITE ROD,FERRITE FLUX ETC
5.Can be supplied with their match bobbin
6.Ferrite core are widely used in computers, tele-communication equipment, consumer's electronics such as TV, VTR and audio sets, industrial automation equipment and various kinds of electronic instruments, etc.As a leading magnets manufacturer in China, supported by our sophisticated quality system, we produce
top-quality soft ferrite, together with famous service.Our main products and each application are listed in the following:(For further information about our products.)
Application of bobbin and ferrite core
Applied in the switching power supply,main power transformer
Applied in the switching power supply,main power transformer
Auxiliary powr transformer,main power transformer,choke coils
Auxiliary powr transformer,main power transformer
Applied in the linear filter,choke,pulse transformer,
drive transformer
Varieties of switching power supply transformer,choke coils ect.
Applied in the linear filter ,current tranformer,smoothing
choke coil,drive transformer, switching power transformers and chokes
Filters, inductors and transformers for telecommunication
other electronic equipment
Filters for telecommunication equipment,
and various kinds of inductors and transformers
Choke coils, Peaking coils, Linearity coils, Alarm coils,
Power choke coils, Fixed choke coils, Filtering coils,etc;
Various kinds of transformers and chokes
Pulse and wide-band transformers,
various types of
FAQ
1-MOQ?
We will work hard to fit your MOQ .Small purchase quantity is ok.
2-Payment term?
T/T, Western Union, Paypal, Credit Card
3-Delivery port?
Shenzhen, Guangzhou, Zhongshan, Hongkong.
4-Shipping date?
About 7 days when we check the payment.
5-Do you produce the core and bobbin by yourself .
Yes.we have 2 head company,1 subsidiary company.one is bobbin factory,one is core factory,last one is transformer factory.
6-Where is your factory?
In ShaanxI
Mn-Zn Ferrite Core,Mn Zn Ei Core,Ferrite Core,Soft Ferrite Core Shaanxi Magason-tech Electronics Co.,Ltd , https://www.magason-tech.com
Keeping the sender and the login mailbox consistent, I also made a mistake when configuring this, because I was using SSL when I was reading Tencent's official website, the port is 465. 
Series
Feature
EE Core
EF Core
EFD Core
EPC Core
PQ Core
UU Core
EC/EER/ER Core
RM Core
POT Core
DR Core
EI Core
Toroidal core
