The choice of central air conditioning needs to be sure of the model first, and then the design of the air conditioning layout. In general, the air conditioner designer will design the location of the tuyere for you. How to arrange central air conditioning? Many readers have no concept in their hearts. If the location is not properly arranged, it will also affect the use of air conditioners. Knowing ourselves and knowing each other, in addition to letting the designer come up with ideas, if you can understand a little basic knowledge, it will be of great benefit to your home's air conditioning design.

First, in the living room, choose the location to pay attention to

The installation position of the central air conditioner is of course determined according to the way the ceiling is installed, and the guest restaurant is undoubtedly the best installation location. As shown in the figure, it only needs to be suspended in the aisle area of ​​the guest restaurant, which reduces the ceiling space and also has a distinct layering between the restaurants. Generally, the airflow mode of the side air outlet and the lower return air is adopted, and the air conditioner indoor unit effectively affects the entire room of the living room.

The air outlet uses double-layer louvers to adjust the air supply direction of the air conditioner. The central air-conditioning indoor unit focuses on the commonly used sofa area in the air supply direction.

Tips: The strip outlet is divided into a single layer and a double layer. Generally speaking, the double-layer air outlet has a good effect and the airflow is more uniform. The double-layer air outlet can close the air outlet, and the single-layer air outlet can also be closed, but it is not dead. In terms of price, the double-layer air outlet is more expensive than the single-layer air outlet.

Second, through the adjustment of the tuyere, the equilibrium temperature

The position of the air outlet and the return air outlet of the central air conditioner is adjustable, and the commonly used methods are side air outlet and lower air return. It can also be applied to side wind, side return air, lower wind and lower wind. Although the double louvers of the air outlet are stationary, they can be manually adjusted as needed, and the direction of the wind is set. There are generally 2 cases:

A. Indoor machine is installed at a corner

The vertical louvers of the tuyere can be adjusted to the left, so that the airflow can better reach the human activity area.

B. The indoor unit is installed in the middle of the large space.

The vertical louvers on both sides can be adjusted to the two sides, so that the airflow can cover the entire space to the greatest extent, and the airflow distribution is uniform.

Third, where is the air outlet?

1. Try to avoid the ceiling side

As far as the air distribution is concerned, if it is a last resort, try not to bury the air conditioning air outlet on the ceiling side. Although it satisfies the aesthetics of the room ceiling design, it will also cause poor heating effect. Therefore, it is necessary to ensure the ventilation around. unobstructed.

2. Avoid the air outlet facing the person

For the bedroom space, also avoid the air conditioning air outlet directly blowing to the person.

3. Air outlet size

To ensure a certain size of the air supply opening, the air supply opening will affect the air conditioning effect.

4. Air outlet position

Select the position of the air supply port so that the wind energy in the air conditioning area can be circulated.

Fourth, choose which way to return to the wind?

1. For large space, it can be used to send back and return the wind back and forth, which not only ensures the beauty but also minimizes the noise.

2. If the ceiling space is not very spacious, it can be used to send the return air to the side, which saves space and is relatively simple and generous to avoid the feeling of depression. If the ceiling space is large enough, it is recommended to use the return air return mode to ensure the heating effect of heating in winter.

3. If the living room does not have any ceiling form and is not willing to adopt the form of wall hanging machine, then it can be considered to send side-to-side or ceiling return air in the adjacent space such as the full ceiling space of the kitchen or bathroom. Wind way.

Fifth, the outdoor machine VS indoor machine placed a few taboos

1, the machine selection Ningda is not small, thinking that the population is small, the use of less room to reduce the air conditioning model is not correct.

2. The outdoor unit should also pay attention to the reasonable arrangement orientation. When designing, it is necessary to consider the location of the installation. It is not convenient to place two or more machines at the same time. This will cause unnecessary waste of energy, but should be up and down or left and right. Placed in parallel.

3, the location of the outdoor unit should also take into account the convenience of future maintenance, should reserve some space for maintenance.

4. The outdoor unit should be placed in an outdoor space close to the bedroom and study room to avoid noise and affect family rest and study.

5, indoor unit position should not be placed on the top of the bathroom or kitchen, if you must put it, you must develop a return air program, do not return to the air in the bathroom or kitchen.

Editor reminder:

For most consumers, some of the relevant knowledge of home central air conditioning system engineering does have professional complexity, and it is helpful to be able to understand it properly before choosing a product. The home central air-conditioning system is not a single product. It also requires the consumer to master some routine design processes. After fully and effectively communicating with the air-conditioning designer, the comfortable living room environment can be properly created, so the design process cannot be ignored. Only know the product, clear the design process, and understand the configuration of the whole system after you understand the construction.

Hydrogel Screen Protector

Perfect fit: The Hydrogel Screen Protector is designed with a Soft TPU material, which can be completely covered even on a curved device, providing perfect protection for the full coverage of the screen.

Oleophobic and waterproof: The use of hydrophobic and oleophobic screen coatings can prevent sweat, grease residue and fingerprints without reducing screen sensitivity. It is almost invisible on the screen and brings a high-definition visual experience.

Sensitive touch: ultra-thin and Soft Hydrogel Film with a thickness of only 0.14mm. As time goes by, it will self-repair minor scratches, provide you with a highly responsive screen protector and maintain the original touch.

Easy to install: The installation of the Protective Film is very simple, without air bubbles. The protective sticker can stay on the phone perfectly, and the bubbles will disappear within 24 hours.

If you want to know more about Hydrogel Screen Protector products, please click the product details to view the parameters, models, pictures, prices and other information about Hydrogel Screen Protective Film.

Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about the Hydrogel Protective Film!


Hydrogel TPU Protective Film,Ultra-Thin Protective Film,Soft Hydrogel Film,Hydrogel Film Screen Protector,Screen Protective Film,Mobile Phone Screen Guards

Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com