Telephone remote controller functions and operations

1. The main functions of the telephone remote controller

The telephone remote controller is one of the remote power controllers and is divided into two parts: the master controller and the slave controller. The main controller dials in through an outside line telephone and enters a controlled state through the voice prompt and password input. After the identity of the host is verified, the sub-controller receives the signal from the main controller through the address and performs the on-off operation of the electrical appliance.

The remote controller of the telephone controls the power switch of the remote electronic apparatus through the voice prompt of the remote telephone, and has the characteristics of stable operation and reliable control.

(1) It is possible to remotely control the operation of 2-way appliances.

(2) After the user controls an electrical appliance, he can hear the sound of the control place. For example, if the fan is controlled, the fan can be heard after the fan is turned on to determine whether the fan is actually turned on.

(3) Password protection: When the authority password test is performed before the control, if the password is correct, the operation is entered, and if the password is incorrectly entered three times, the system will automatically hang up.

(4) Password modification: The password can be modified remotely. The initial password is 1 2 3.

(5) Modification of the number of rings: The remote control changes the number of rings, after which the phone automatically connects.

2. Telephone remote controller local operation

(1) Use a telephone line to connect the HH501 telephone remote controller to the telephone, that is, insert the plug of the telephone line into the corresponding hole.

(2) The power plug of the electrical equipment is plugged into the output power socket on the panel of the HH501 telephone remote controller. There are a total of 1, 2, 3 three sockets, that is, three devices can be operated at the same time.

(3) Turn on the power of the telephone's remote controller. After the connection is complete, wait for the operation.

Telephone remote controller installation and operation

1. Installation connection (HH501 telephone remote controller)

(1) Connect the telephone remote controller to the telephone, that is, insert the plug of the telephone line into the corresponding hole.

(2) The power plug of the electrical equipment is plugged into the output power socket on the panel of the HH501 telephone remote controller. There are 1, 2 and 3 sockets, which means that 3 units can be operated remotely at the same time.

(3) Turn on the power of the telephone's remote controller. After the connection is complete, wait for the operation.

2. Remote operation (HH501 type telephone remote controller)

(1) Use a landline or mobile phone to dial the telephone connected to the telephone remote controller. After the bell rings 5 ​​times, the prompt “Please enter the password” will appear. Dial the 6-digit password via the keypad on the phone or mobile phone and press the group number button to end.

(2) Then the prompt tone "please enter the device number" (refer to 1,2,3 three electrical outlets on the electrical equipment), operation 1 socket on the device dial 1#; the same 2 socket dial 2# ;3 Outlet dial 3#.

(3) The tone "O power, 1 power failure, 2 query" appears again:

Dial “O”, the socket is powered on, and the corresponding indicator lights up; dial “1” in the original power state will power off, while the indicator light goes out; dial “2” voice prompts the socket is currently “power on” or “power off” status".

(4) When the operation is correct, you will hear a voice prompt “Operation Succeeded” and a new voice prompt “Please enter the device number” will appear to continue the operation.

1 When the operation is completed, it stays for 25s, the system will automatically hang up and end the operation.

2 At any time, you can press step "2" to check the working status of the socket.

3. Local operation (HH501 telephone remote controller)

(1) Pick up the phone.

(2) Press the control button on the right side of the telephone controller and immediately hear the prompt tone "Please enter the device number", enter "1#" or "2#" or "3#", tone "O power, 1 Power off, 2 inquiries, input "O", "1" or "2" to operate the three devices on and off status from zero distance, also can see the corresponding socket indicator light, off, to determine the corresponding socket is Power is still off. After the operation is completed, you will hear the “please enter the device number” for the next operation until the operation is completely completed.

4 parameter settings

(1) After the prompt tone "enter device number", enter "rate #" to indicate the parameter setting.

(2) In the command format, you can change the password (6 digits), modify the number of dialing rings (1-99 times), and modify the automatic hangup time (5-25s).

Related browsing:

A: The door remote control smart lock picture Daquan

Recommendation: The best brand of smart lock The importance of fingerprint door lock The recognition of fingerprint password lock