Robotic action is how to complete - Database & Sql Blog Articles

Single chip microcomputer STM32L151CCU6

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ) 7.5PF 10PPM 20PPM 30PPM

SMD aluminum electrolytic capacitor

Probe high current needle 120 needle head diameter is 3.0 threaded needle high current needle total length is

L0504-Murata muRata common mode inductor 90Ω 150mA

What is the robot to control? The left and right movement of the robot arm (horizontal direction) is controlled by the forward and reverse rotation of the telescopic stepping motor; the up and down motion (vertical direction) is controlled by the forward and reverse rotation of the stepping motor;

The clamping device of the manipulator adopts a cylinder and a vacuum suction cup, and the clamping adopts a telescopic cylinder to squeeze the exhaust type, and the suction cup is pressed against the surface of the sucked object by the external force, and the air in the inner cavity of the suction cup is squeezed out to form a negative pressure inside the suction cup. The loosening is controlled by a solenoid valve to control the flow of air into the suction cup, and the entire clamping and loosening is controlled by a solenoid valve.

In addition, the injection molding machine manipulator to achieve the above actions, the system also has a stepper motor drive module, plc control module and stroke control components.

What can the robot do for you? Some of the owners of injection molding plants may not understand before installing the robot. When you encounter some products that are not easy to demould, you will find that it is a waste of labor and a waste of processing costs. When operating a large tonnage injection molding machine, you Workers will find that they are particularly tired when running on the injection molding machine, which is prone to fatigue, and it is very inconvenient to work. When safety is high, the output is reduced. When you schedule a production plan, it is always because of the manual operation time. Unfixed, fatigued, absenteeism, loss of personnel, and can not be completed; when your product automatically falls off causing bruises and dirt caused by dirt; you will find that after using the injection molding machine manipulator, all problems are solved .