International Consumer Electronics Show, Las Vegas, January 5, 2016 —LEDs are increasingly being used in automotive front lighting systems, pushing the projected demand for LED drivers in 2020 to 120 million units. LEDs are a common choice for headlights, daytime running lights, width lights, fog lights and turn signals with their power, cost and size advantages. Cypress Semiconductor Corporation (NASDAQ: CY) today introduced a new LED driver that enables a smaller and more cost-effective LED front lighting system. The unique feature of this automotive LED driver is its ability to drive a single LED at a switching frequency of 2.1-MHz, enabling a compact solution that uses small, inexpensive inductors to reduce the physical size of the system and reduce bill of materials (BOM). Kiyoe Nagaya, vice president of Cypress's Analog Division, said: "Like the traditional light bulbs, LEDs consume less power and are smaller in size, allowing automakers to flexibly create iconic lighting effects for their vehicles. Plass' LED drive solutions are highly competitive in the market, avoiding the use of large, expensive inductors to drive a single LED, raising the threshold for automotive front lighting systems." In addition, Cypress's new S6BL111A automotive LED driver supports an input voltage range of 4.5-42 V, which can be adapted to extreme operating conditions such as cold start (automatic engine causing excessive current during cold start) and load dump (engine) The battery is disconnected during operation and a surge voltage occurs when the alternator is powered). The S6BL111A is a single-channel 1A output LED driver that supports both analog and PWM dimming for fine brightness control. The driver's switching frequency can be set between 205kHz and 2.1MHz with an output current accuracy of +/- 2%. The drive also provides system safety features such as overcurrent and overvoltage protection for electrical system protection design; it also shields annoying LED OPEN diagnostics during cold starts. Cypress offers kits to help designers evaluate their automotive LED technology. The Automotive LED Driver Evaluation Kit (CYALKIT-L01, CYALKIT-L02) includes an S6BL111A driver, multiple automotive-grade peripheral components, multiple external pins for easy test point monitoring waveforms, and a PCB circuit pattern for auxiliary replacement and add-on components. . Availability The new S6BL111A driver is sampling now and is expected to be commissioned in the second half of 2016 in a 16-pin HTSSOP package. Cypress helps build the most advanced automotive systems Cypress works with leading automotive manufacturers around the world to create cutting-edge automotive systems that are standard on luxury and mainstream models, including Advanced Driver Assistance Systems (ADAS), 3D graphics displays and full-featured touch screens. The combination of Cypress and Spansion has created the industry's third-largest supplier of automotive memory and microcontroller (MCU) offering a richer product portfolio including TraveoTM MCU Series, Power Management IC (PMIC), PSoC ® Programmable System-on-Chip Solutions, CapSense® Capacitive Sensing Solutions, TrueTouch® Touch Screens, LED Drivers, NOR Flash, SRAM and F-RAMTM Memory, and USB and Wireless Connectivity Solutions. The strong product portfolio is based on Cypress's zero defect and commitment to providing world-class service, as well as the most stringent ISO/TS 16949 quality management system, Automotive Electronics Council (AEC) IC and Production Part Approval Process (PPAP) guidelines. Compliance with industry standards. About Cypress Cypress (NASDAQ: CY) provides the core high performance, high quality solution for today's most advanced embedded systems for automotive and industrial and networking platforms to highly interactive consumer and mobile A wide range of equipment. We have a broad portfolio of differentiated products including: NOR Flash, F-RAMTM and SRAM, TraveoTM microcontrollers, the industry's only PSoC® programmable system-on-chip solution, analog and PMIC power management ICs, CapSense® capacitive Touch-sensing controller, wireless BLE low-power Bluetooth and USB connectivity solution. Cypress is committed to providing innovative, industry-leading support and superior system value to customers around the world. Cypress, the Cypress logo, PsoC, and CapSense are registered trademarks of Cypress Semiconductor Corporation, and Traveo and F-RAM are trademarks of Cypress Semiconductor Corporation. Other trademarks are the property of their respective owners. Single-point Sensor, aluminum alloy material, suitable for electronic Scales, counting scales, electronic balances and industrial weighing systems. Alloy steel and stainless steel materials are suitable for ground scales, packaging scales, hopper scales, monorail scales, forklift scales, truck scales, and other weighing systems. The cantilever beam sensor is characterized by high accuracy, strong stability, easy installation and use, suitable for various environments, and a wide range. Single Point Load Cell,High Precision Load Cell,Aluminum Powerful Load Cell,Aluminum Electronic Scale Load Cell,Shear beam style load cell Ningbo Santwell Imp & Exp Co.,Ltd , https://www.santwell.com
