This comparative evaluation is divided into two parts, the first part is the simple unpacking of iphone7, the second part is the comparison of iphone7's official silicone shell (Midnight Blue) and Evutec's black apricot wood mobile phone shell. After experiencing the pre-purchasing of the official website on September 9th, China Merchants Bank's 12th period of interest-free payment has not been received. Under the obstruction of the first batch, it finally got 7 and 7P on the 16th and did not disappoint the expectations of the leaders. Then I forgot where I saw the news that Evutec was holding a new product trial event. Taobao checked Evutec and found that it was full of compelling information. So he immediately rushed to the official WeChat to apply for a trial. Thanks to Zhang Aunt's experience in drying sheets. I did not expect 7 places I actually are in the middle, I simply ordered a midnight blue silicone shell in the official website to a comparative evaluation (meat hurts, never bought such an expensive mobile phone shell), but also feedback about Zhang Aunt, provide Some use feelings, so there is this article. The 7 and 7P boxes all use the back side as the cover, the main reason is that the upgrade can only be reflected in the back, including new color, upgraded camera (including 7P dual camera), new white belt, new flash I have to say that the proportion of iphone's screen is too low, and the front panel of white panel feels a bit unacceptable (fortunately, leaders don't look at Zhang Aunt). Frosted black new color, F1.8 new camera, four-color flash, new features on the back at a glance I felt that the leucorrhea design was a bit like the design of MX6 and MX6Pro. I didn't understand that it was the first to be designed. However, this kind of design can still play a role in ignoring the existence of leucorrhea in the visual sense. Becomes black and basically does not show its existence The aesthetics of SA screens are inherently inferior to those of LCD screens, but the proportion of screens in S7 is much better than that of iphone 7, and the size of 5.1-inch screens is almost the same as the size of 4.7-inch models. Feeling is better than the domestic machine to do, domestically made better personal feeling only Meizu MX series, the end of the box to this end, the following is a comparison of mobile phone shell The official shell purchased in the official website, Evutec's black apricot wood on the Jingdong link, the current official WeChat is still on a permanent free exchange of activities, are interested can go and see, I got it this time should be this paragraph: Compared to many wooden mobile phone shells currently sold by Taobao, only a layer of patches is placed on the back of the mobile phone shell. This gives people a feeling that the back is a whole piece of wood chips. But why is it that it feels like it? To be honest, Evutec's shell does look good on the back and feels good. The official shell looks very general, but it feels quite good. From the comparison of the figure, we can see that the official camera around the camera is sunk type, and Evutec is protruding from the surrounding, indicating that simply the thickness of the shell back, Evutec is thinner than the official shell, but the overall thickness of the shell can be Look at the picture behind to get the conclusion The opening of the two shells is done very well without burrs We can see that Evutec is not an all-in-one design, but by bonding the black core wood chips on the back with the silicone around it, so there will be some flaws in the workmanship. However, this is not an officially released version. I hope this problem is Improvements in the official version Although the thickness of Evutec's back patch is smaller than that of the official shell, the overall thickness of the silicone protective layer is more than that of the official shell, and the shell of Evutec is uneven and has an edge. Place some mobile phones and fit photos below Evutec's perimeter protection uses a harder black silicone and has made this stripe design and a full-package design to make it more effective when the phone falls. Feel 4.5, the official shell feels very good, including grip, damping sense is great, but the volume and power keys touch feedback is a little weak Protective 4, hemi-envelope design, four corners can be protected, but the lack of protection at the lower speaker and data port, may cause scratches in daily use to paint and bump Appearance 4, the appearance of this more subjective, personally feel that midnight blue matte black is still very good-looking, that is not monotonous black shell with the black shell, there is no black phone with large red contrast so large, some people can not accept Workmanship 5, the official shell is a one-piece, can not see the stitching or glue traces, great workmanship Dirty 4, the official shell because it is the cause of silica gel, it is easier to stain with some dust, but a rub or a blow can get rid of, or more dirty Feel 4, because it is not an integrated design, the surrounding and the back of the material is not the same, plus the surrounding stripe treatment, the overall feel is worse than the official shell, but the back of the black apricot wood is very comfortable, volume keys and power button touch feedback is very it is good Protective 5, all around the use of hard silicone all-inclusive design, each position drop will not cause scratches on the phone, the protection performance is better than the official shell The appearance of 4.5, the back of the black apricot wood is very texture, it is very easy to shoot some very poisonous photos on the back of the shoot alone, but after the addition of silica gel around the value of some decline Workmanship 4 There are some flaws in the workmanship. There are some gaps and glue marks on the black apricot wood joints, but due to the trial version, it should be improved in the official release version. Dirty 4.5, black apricot wood material will not stick to dust during daily storage, dirt resistance is better Overall, the official price of these two mobile phone shells has exceeded 250, in fact, as I have always felt that the mobile phone shell is not worth so much money, spend so much money is not as good as streaking, this experience the end of these two After the mobile phone case, I still didn’t change my mind about “a penny, a dollar, or a ten yuan.†However, if you want to protect your mobile phone without losing the beauty and feel of the phone, you should not lose money. I think these two shells can enter your choice. In addition, Evutec has a S version of a variety of material protection shell on the iphone6s, personally feel that in the iphone7 follow-up protection shell design can also take this idea, after all, this version of the surrounding material and design or the sense of the opponent there is a certain influence, Above, thank you for watching the official reward
DC Capacitor For Electric Furnace DC Capacitor for Electric Furnace DC Capacitor For Electric Furnace,DCMJ DC Filter Capacitors,DCMJ Pulse Capacitors,DCMJ DC Support Capacitors YANGZHOU POSITIONING TECH CO., LTD , https://www.yzpstcc.com
Iphone7&7p packing box 
Iphone7&7P positive 
Tear off the protective film 
The 7&7P's handset also has the function of a speaker. There are two speakers on the top and the bottom. Similar to the HTC design, Apple finally started to consider the issue of the sound quality of the outside world. 
    Have to say that the black panel in some angles with the 2.5D arc of the glass is still quite texture, the aesthetics of the screen 
The double shot on 7P is the biggest bright spot, but for the moment, I don’t think it’s a big difference between the camera and the 7. Only the 2X optical zoom may be more practical. I’m looking forward to the optimization of Apple’s back. 
7P white belt design 
               7 white belt design 
   After playing for a while, the back of the matte black is also full of fingerprints, if the back of the bright black is already appalling 
Positive contrast between iPhone7 and S7 (ignoring fingerprints on the screen) 
Comparing the size of 7P, S7, and 7, it took a while for S7 to feel that this size is really the size of one-handed use. The 7P feels too wide, and it is basically used with two hands. 
S7 and iphone7 2.5D arc screen contrast 
          Compared with express packaging, Apple is still relatively cheap material 
Comparison of the two mobile phone shell packaging, Apple also saves material 
This time, I got the black apricot version through trial 
Midnight blue silicone shell purchased on official website 
Evutec's packaging is drawer-style, reusable and smooth 
On the back of Evutec's packaging, a large number of designs said they couldn't read it, as if there was a chip inside, but Baidu had not found any information on this AFIX. 
Iphone7 phone case, American design, made in China 
Evutec's mobile phone case, Chinese design, made in the United States, completely reversed with Apple 
Unmatched photos of two mobile phone shells 
The interior of the official silicone sleeve has been treated with this kind of fuzz to provide better care for the mobile phone and the actual feel is also very good 
Evutec's interior still uses materials that are consistent with the backside 
The back of the official shell 
Evutec's back material 
Evutec's back (camera section) 
The back of the official shell (camera section) 
Open hole and detail comparison 
Open hole and detail comparison 
Open hole and detail comparison 
Open hole and detail comparison 
Open hole and detail comparison 
             Open hole and detail comparison 
Evutec workmanship on some small defects (glue traces) 
Evutec work on some small defects (fit gap) 
            Comparison of the thickness of two mobile phone shells 
Official shell fit, half package design 
Evutec shell fit, all-inclusive design 
The official shell fits around, slightly higher than the screen, half-bag design, but the four corners can be protected 
Camera below protective case 
Evutec shell camera details 
Evutec's rear cover is also slightly higher than the camera, can effectively protect the camera 
Official shell details 
Evutec shell details 
Evutec shell details, slightly higher than the screen, but there are some irregularities on the right side 
Official shell mute key opening details 
Evutec shell mute key opening details 
Evutec shell bottom opening details, speakers and lightening openings are more accurate, work without burrs 
Four-dimensional detail of Evutec shell 
The whole back of the Evutec shell, look at the back part of the cover alone is really much better than the official shell 
Evutec shell back detail, black apricot wood color and texture is still very texture 
          No intention to see a detail on the package, said there are three layers of material on the back 
Because there is no macro lens, only zoomed in and watched. There are indeed three layers. In addition to the two wooden patches, there is a layer of white material in the middle. The specific thing is not known, but it still proves that the parameters on the box are not Void Official shell:
Evutec shell: