Pole light sources solar panel battery suitable for street, road, high way, squares, schools, parks, gardens, residential areas, outdoor lighting plant,  etc.  Contact Us: Material: 1. All of our material are purchased from famous mill factory to assure the quality. 1. Pole,base plate and under ground fixture can be specially made as required. Inspection: 1. Management team : We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management . 7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order. 8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company. Pole light sources solar panel battery suitable for street, road, high way, squares, schools, parks, gardens, residential areas, outdoor lighting plant,  etc.  Contact Us: Material: 1. All of our material are purchased from famous mill factory to assure the quality. 1. Pole,base plate and under ground fixture can be specially made as required. Inspection: 1. Management team : We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management . 7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order. 8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company. We offer rgb led bar dmx lighting, similiar with american dj lighting or RC lighting, the LED Pixel Bar is Color Changing Light Bar. Led Rgb Bar , led rgbw bar is available. pixel bar have 1 led light bar, 2 led light bar, 3 led light bar, 6 Led Light Bar. It's dmx512 programming, the address have two type, one is auto address, another is manual address. That's to say we have led bar auto and led bar manual. Auto led bar, you don't need assign dmx address, it's convenience for event show and led light rental. Manual led bar, you need assign dmx address by Address Writer before light up, for DJ club, architecture light, it's ok. Maybe you want to know how to install a led light bar, don't worry, we have bracket, so that you can fix the bar easily. Regarding color changing led light bar, you can control by Led Controller. Led Pixel Bar Led Pixel Bar,Led Pixel Bar,Pixels Bar,Color Changing Light Bar Shenzhen Iseeled Technology Co., Ltd. , http://www.iseeledlight.com
Specification introduction
height 3-12m or more/Q235 Q345 seamless steel/hot dip galvanizing and spraying  powder/ parameters vary according to models , the colour can choose freely as the colour card
DC 12V/24V various Watt LED lamps Low Pressure Sodium 5750Lm, Operating Temperature -40°C~75°C , LED Chip BRIDGELUX / Cree ,≥60000H life span
poly/ mono crystalline solar panel , life span over 25 years
lead-acid battery,gel battery life span:5-8 years
location of the battery box
in the middle ,at the top of the pole ,underfround or according to the client' requirement
other accessories
nuts,screw,bolts fixed mount,wrie,embedded parts,flange
working time
8-12hours/day, can continue working 2-3 days without sunlight
controller
optical&time control ,phocos
working temp &Â wind resistance
- 30°C-60°C & - ≥136km/H
packages
nylon,woven bag,foam or plastic bubble.and we also can packed as your demands.
The Applications and Projects
The PV field is a new domain, it is freely, enviromental, and it has high efficiency. 
Factory Show
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob:Â 86-15192600825
 Â
 Â
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory :Â We are manufacturer, specializing in producing all kinds of steel poles for more than 15years, competitive with good quantity.
FAQ:
Q1: Can I have a sample order for led light?Â
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
AÂ :Sample needs 3-5 days, mass production time needs 1-2 weeks for order.Â
Q3. Do you have any MOQ limit for led light order?
 A: Yes, MOQ: 1pcs.
Q4. How do you ship the goods and how long does it take to arrive?
 A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
 A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 15 years warranty to lighting poles, 15 years for solar panel, 3years for battery, 2Â years for charge controller.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Yangzhou Borui Electric Lighting Co., Ltd.
Specification introduction
height 3-12m or more/Q235 Q345 seamless steel/hot dip galvanizing and spraying  powder/ parameters vary according to models , the colour can choose freely as the colour card
DC 12V/24V various Watt LED lamps Low Pressure Sodium 5750Lm, Operating Temperature -40°C~75°C , LED Chip BRIDGELUX / Cree ,≥60000H life span
poly/ mono crystalline solar panel , life span over 25 years
lead-acid battery,gel battery life span:5-8 years
location of the battery box
in the middle ,at the top of the pole ,underfround or according to the client' requirement
other accessories
nuts,screw,bolts fixed mount,wrie,embedded parts,flange
working time
8-12hours/day, can continue working 2-3 days without sunlight
controller
optical&time control ,phocos
working temp &Â wind resistance
- 30°C-60°C & - ≥136km/H
packages
nylon,woven bag,foam or plastic bubble.and we also can packed as your demands.
The Applications and Projects
The PV field is a new domain, it is freely, enviromental, and it has high efficiency.Â
Factory Show
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob:Â 86-15192600825
 Â
 Â
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory :Â We are manufacturer, specializing in producing all kinds of steel poles for more than 15years, competitive with good quantity.
FAQ:
Q1: Can I have a sample order for led light?Â
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
AÂ :Sample needs 3-5 days, mass production time needs 1-2 weeks for order.Â
Q3. Do you have any MOQ limit for led light order?
 A: Yes, MOQ: 1pcs.
Q4. How do you ship the goods and how long does it take to arrive?
 A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
 A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 15 years warranty to lighting poles, 15 years for solar panel, 3years for battery, 2Â years for charge controller.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Illumination Time: 12h
Cell Type: Gel Battery
Charging Time (H): 4
Usage: Garden, Street, Road, Park, Highway, Residential, Square
IP Rating: IP65
Certification: CE, RoHS
Voltage: 12/24V
With Light Source: With Light Source
Solar Panel: Mono or Poly Solar Panel
Battery: Gel Battery
Controller: 5A, 10A, 15A, 20A
Battery Box Material: Steel, PE
Battery Box Type: on The Pole, Underground
Mounting Bracket: Aluminum Alloy
Operating Temp.: - 30°c to 60°c
LED Life Span: More Than 60000h
Wind Resistance: 136km/H
Surface Treatment: Hot DIP Galvanised, Spray
Trademark: Borui
Transport Package: Woven Bag, Nylon, Plastic Bubble Paper, Felt etc.
Specification: steel Q235, Q354
Origin: Yangzhou, Jiangsu
HS Code: 94054090
Illumination Time: 12h
Cell Type: Gel Battery
Charging Time (H): 4
Usage: Garden, Street, Road, Park, Highway, Residential, Square
IP Rating: IP65
Certification: CE, RoHS
Voltage: 12/24V
With Light Source: With Light Source
Solar Panel: Mono or Poly Solar Panel
Battery: Gel Battery
Controller: 5A, 10A, 15A, 20A
Battery Box Material: Steel, PE
Battery Box Type: on The Pole, Underground
Mounting Bracket: Aluminum Alloy
Operating Temp.: - 30°c to 60°c
LED Life Span: More Than 60000h
Wind Resistance: 136km/H
Surface Treatment: Hot DIP Galvanised, Spray
Trademark: Borui
Transport Package: Woven Bag, Nylon, Plastic Bubble Paper, Felt etc.
Specification: steel Q235, Q354
Origin: Yangzhou, Jiangsu
HS Code: 94054090
Yangzhou Borui Electric Lighting Co., Ltd.