With the upgrading of China's industrial industry, the market demand for precision small parts is increasing. Because these small parts have the characteristics of small product size, light weight (0.1g～0.02g), and high unit price, the demand from customers is often Tens of thousands or even millions of pieces, which makes it difficult for small parts manufacturers to make clear statistics on the number of specific products shipped; and now manufacturers generally use electronic weighing and measurement to estimate. However, due to different product densities, there will be a certain error rate (5‰～1%) in weighing. In order to avoid insufficient shipments, manufacturers can only rely on multiple shipments to make up for this error rate. This reduces the profitability of parts manufacturing enterprises.

After learning of this situation, Beijing Lingbang Company organized technical personnel to upgrade the company’s parts intelligent sorting robot in response to this problem, so that the product can not only perform high-speed and intelligent analysis of dimensions, geometric tolerances and surface defects on industrial production lines. In addition, the qualified products can be counted and divided according to the specified quantity, which can effectively help customers to calibrate the weighing measurement of qualified products. The specific operations are as follows:

1. Open Lingbang parts intelligent sorting robot inspection system software, find the "discharge bin" option and click to enter. This function is mainly completed by specifying two discharge ports, "Qualified Port 1" and "Qualified Port 2", as follows The picture shows:


2. At the bottom right of the software, select the unloading port you want to specify at "Qualified 2" (select "None", which means the function is not enabled), and enter the quantity you want to discharge in the quantity dialog box below, as shown below:

After the setting is completed according to this operation, the equipment will alternately discharge the tested products in the two qualified discharge ports according to the previously entered discharge bin quantity.

For example: if the customer wants to weigh 50,000 pieces of qualified products in a pack of 5,000 pieces, then we can select “Qualified Port 2” at the bottom right corner of the “Discharge Classification” interface and fill in “5000” "In this way, the equipment will discharge 5000 pieces of qualified products according to the qualified port 1, and then discharge from the qualified port 2. At this time, the operator can weigh the 5000 qualified products sorted out from the qualified port 1. After 5,000 pieces are sorted out from the qualified port 2, the equipment will automatically switch to the qualified port 1 for discharging, and so alternately until the inspection of 50,000 pieces is completed.

It is believed that the discharging and sorting function of the intelligent parts sorting robot of Beijing Lingbang company can perform weighing and measurement calibration for customers, which will help improve the production profit rate of the enterprise.

Shear Beam Load Cell

GALOCE Shear beam Load Cell, cantilever load cell also called single ended shear load cell, bending beam load cell, tend to be the most commonly used due to the variety of available options. load cell 1ton,500kg load cell,3 ton load cell are hot sales still. A beam load cell is one of the major categories or types of load cell commonly found within the weighing industry. Other types include, for example; compression, tension and single-point. They are arguably the most common type of load cell in use today.One end of the shear beam load cell contains the mounting holes while the opposite end is where the cell is loaded. The load cell should be mounted on a flat smooth surface with high strength hardened bolts. The larger shear beam cells have more than two mounting holes to accommodate extra bolts to keep the hardware from stretching under stress load. They are widely used in floor scale, livestock scale, anilmal scale, forklift scale, tank weighing systems and other weighing devices.

Shear Beam Load Cell,Beam Load Cells,single ended shear load cell,3 ton load cell,500kg load cell

GALOCE (XI'AN) M&C TECHNOLOGY CO., LTD. , https://www.galoce-meas.com