The Internet of Things is mainly used in the vertical market. The IT systems in this type of market have high requirements for integration capabilities. In the past, Taiwanese manufacturers focused on the horizontal division of the semiconductor industry. Xie Yufen, chairman and general manager of Fukang Technology, pointed out that if it fails to strengthen With the integration capabilities, Taiwanese companies will have limited development in the Internet of Things. The Internet of Things issue continues to fever for many years. In the past few years, the power of the electronics industry has gradually increased. From 2016, AI has joined the IT industry battlefield and become another focus of the market. AI is regarded by most market participants as the last piece of the Internet of Things. Jigsaw, through the blessing of AI, the Internet of Things will be able to implement an intelligent vision. Taiwanese manufacturers also believe that the combination of the two will open up more application markets and create more business opportunities, but Xie Kangfen, chairman and general manager of Fukang Technology It is pointed out that the Internet of Things will move to different types of vertical market applications. This type of application focuses on semiconductor 3D packaging and micro-system design. The product development of Taiwanese manufacturers has always focused on IC design. If the strategy cannot be changed, the future business opportunities in the Internet of Things are limited. . Xie Yufen said that Taiwan is a global semiconductor industry, and both wafer manufacturing and IC design occupy an important position in the industry. However, for a long time, Taiwanese semiconductor manufacturers have focused on the research and development of their own products, and there are few strategies for vertically integrating the industry chain. Xie Yufen compares with other foreign peers. Taiwan's "IC design vendors", as the name implies, focus only on the design side, but abroad is "Fabless", meaning that in the overall design, there is only a lack of wafer manufacturing. The difference lies in the vertical integration of the supply chain, and this thinking is less, and the competition in the Internet of Things will be weak. Xie Yufen further pointed out that the application of most IoT systems requires less computing power than mobile phones and tablet computers, but has special requirements in terms of integration, stability, and even durability. These special needs require different aspects of design, such as new institutions, new materials, etc. These parts have always been neglected by Taiwanese manufacturers. If the relevant capabilities are not strengthened as soon as possible, even if the business opportunities of the Internet of Things are bigger, Taiwanese manufacturers will find it difficult to take steps. . Xie Yufen takes the business of Fukang Technology as an example. Fukang Technology is mainly based on product testing and analysis. It is the only cross-CA (chemical analysis), SA (surface analysis), MA (material analysis), FA (failure analysis), RA (reliability analysis) and other five areas of analysis and testing companies, these different ways of testing, corresponding to different applications, in the past in the field of consumer products, these tests are easily ignored by Taiwan manufacturers, but in the Internet of Things era, the products are oriented Importance will be highlighted, and this will also be the winning point of market competition. The 5A test of Fukang Technology covers most applications of the Internet of Things. For example, in the important modules and systems of the Internet of Things, there are inevitable components such as radio frequency (RF), micro-electromechanical systems (MEMS), sensors (Sensor), etc. It may be in a harsh environment, so it is necessary to analyze the materials and mechanisms of its packaging to ensure the quality of the products after leaving the factory. Xie Yufen confessed that shipping in the state of undetermined product quality will likely face the next difficult. Return processing, the damage is even greater, the quality cost is higher. However, for the development of the Internet of Things, Xie Yufen holds an optimistic view, pointing out that the development of the Internet of Things has become an irreversible trend. In recent years, the rise of AI will accelerate the intelligentization of the Internet of Things, but Taiwanese manufacturers must be more active in vertical integration. Yes, Taiwan’s related manufacturers in the relevant fields are all well-equipped. Take Ji Kang Technology as an example. At present, the company’s equipment, technology and talents are quite high. It is believed that other manufacturers in the industry chain have enough The technology can be fully supported, so if Taiwanese manufacturers want to open up IoT business opportunities, she suggests that in addition to continuing betting on chip design, it is necessary to start experimenting with upstream and downstream technology integration in order to gain a foothold in an increasingly competitive market.
TPS Flat Cable
AS/NZS 5000.2 approved eletric cable: TPS,building cable export to Australia, New Zealand, Fiji, Papua New Guinea and other Oceania market for more than 10 years, quality assured.
- Standard applied: AS/NZS 5000.2
- U0/U: 450/750V
- Certification: SAA
- fire resistance or Low smoking and Halogen free or other property can be available
Tps Flat Cable,Tps Flat Wires,Tps Flat Electrical Cable,Rubber Electrical Cable Shenzhen Bendakang Cables Holding Co., Ltd , https://www.bdkcables.com