The LED guardrail tube is a commonly used lamp for lighting the building. In many cases, it is installed at a relatively high level and is relatively difficult. Also, different installation locations have different installation methods. Here we briefly introduce the common installation methods of several LED guardrail tubes. First, installed on the cement wall The most common is installed on the cement wall surface. Generally, the aluminum guardrail tube is fixedly mounted on the wall surface, and then the LED guardrail tube is fixed and fixed by bolts; while the ordinary LED guardrail tube is fixed by the clip, plus double-sided Glue, structural glue assisted. As shown below: Second, installed on the Ferris wheel and bridge column Like the Ferris wheel and the bridge cylinder, it is made of metal material and is not suitable for drilling. The suitable installation method is to first install the hole in the bottom of the aluminum fence of the LED guardrail tube, and fix it on the railing with a strap; or fix it with double-sided tape and structural glue. , hoop assist. Third, installed on the glass wall Nowadays, many high-rise buildings and hotel hotels are all glass curtain walls. This is even more difficult to punch holes. The glass glue and double-sided tape are used for fixed installation! Generally installed on the glass curtain wall, the shell will be painted according to the needs, try to hide the LED guardrail tube. In different locations, the LED guardrails are installed in different ways, and the outer casing of the product has to be changed accordingly. Limit Switch,Micro Limit Switch,High Limit Switch,Telemecanique Limit Switch Shanghai Janetec Electric Co., Ltd. , https://www.janetecelectric.com