Alps Rotary Switch,Rotary Switch Enclosure,Rotary Switch Light Socket,Rotary Switch For Floor Lamp DA CHENG MINGHUA LIMITED , https://www.alpsswitch.com
At the press conference, Lei Jun did not mention the 3D function of Xiaomi TV 2S. When the price of 2,999 yuan was announced, applause from the audience was particularly enthusiastic. A trace of shock was written on his face. Looking back now, if Lei Jun talks about cutting down 3D, will the applause of the audience be so warm?
This decision is quite bold. It is consistent with Xiaomi's consistent product strategy - quietly killing those features that are too sloppy for most people, so that the cost of the product can really drop. But it will inevitably be a pity for 3D movie lovers.
Millet TV 2S uses its own backlight technology on the screen. The effect is more uniform backlight. The black screen under dark light is darker and there is almost no visible light leakage at the edge of the screen. This is also its biggest technical highlight. The other major change in the 2S is the appearance. The two-stage design makes the upper part of the fuselage even thinner.
Here we talk about some differences between the millet TV 2S and the 49-inch version of the millet TV 2:
A. Small plug, big difference 
At the press conference, Lei Jun spent a long time introducing this tiny power plug (left). In fact, it can be seen at a glance that the plug of the Xiaomi TV 2S is much higher than the plug of a general TV. If you put the TV on the wall, you can really make the power cord closer to the wall and save some space.
B. The base is easier to install 
The new base (bracket) is more convenient to install, insert it directly into the bottom hole and screw it in place. 
The previous base was difficult for one person to complete the installation. 
Millet gave a screwdriver for loading and unloading the bracket, ensuring that it can be installed by unpacking, which is conscience.
C. Thickness, only half thin 
If you remember the warm-up poster titled "PK," it would be a little disappointing to see the real machine. 
There are two pitfalls in the thinness of the millet TV 2S. First of all, it adds a layer of bright metal to the border (ours is light green). The poster only photographed this layer of metal instead of the real border; 
Secondly, this TV adopts an obvious two-stage design. The upper part is made of a metal back cover, thin, and the lower half is still a plastic back cover, thick.
D. Independent speaker 
If you are willing to add 1,000 pieces, buy the home theater version of Millet TV 2S. Its wireless subwoofer is the latest "garbage bin," the same as the 55-inch home theater. The 49-inch is still equipped with an old square subwoofer.
Millet TV 2S subtraction:
1.3D function disappears 
On this issue, a reporter from Lei Fengwang interviewed two people in the TV industry. One said "TV 3D is not really useful, but it is a gimmick." Another told us "If you cut off 3D functions, the cost of the display panel can be reduced by approximately 30. %~50%†(graphics and 3D settings for 49-inch millet TV 2).
2. Touch switch change button 
The 49-inch millet TV 2 uses a touch switch to recall system setup options such as 3D settings. The 48-inch millet TV 2S has been replaced with a big button. The remote control must be used to recall the system settings. Of course, it does not support 3D.
3. Interface saves a MicroSD card slot 
In terms of interfaces, in addition to cutting off the MicroSD card slot, millet TV 2S did not change, including the interface layout is the same.
4. Remote control Bluetooth change infrared 
Millet TV has two types of remote control, one is a traditional infrared remote control (as shown above), and the other is a Bluetooth remote control. The appearance of the two is the same, but there is a Bluetooth logo on the Bluetooth remote control.
Millet TV 2S uses infrared remote control, anti-blocking ability than Bluetooth, the cost should be lower.
5. The ambient backlight adjustment function disappears 
Millet TV 2S cut down the environmental backlight adjustment function. According to Xiaomi TV staff, the function implemented by the software is difficult to be perfect, and sometimes the user is confused, so the new TV has removed this function. Based on this, we speculated that the ambient light sensor should also be omitted. The previous generation sensor was located in the bottom touch operation area.
to sum up 
How to subduct products? Millet TV 2S is a role model. On the one hand, it pursued breakthroughs in appearance and craft details, as well as computing performance and image quality performance. On the other hand, it drastically cut away the relatively insensible parts of the user.
Cutting down the cost of 3D display, Bluetooth remote control, and touch switches, etc., has been used for more important appearance, performance and picture quality. The cheapness of Xiaomi TV 2S is justified. 
(The left is a 48-inch millet TV 2S, right is a 49-inch millet TV 2)
This content is copyrighted exclusively by SofaNet. Welcome manufacturers to further exchanges and cooperation with us to create more in-depth product reports.
Smart TV box recommended to install sofa butler, download address: http://app.shafa.com/
Sofa Net is an Internet technology company specializing in smart TVs and boxes. It owns popular products such as sofa butlers, sofa tables, and sofa forums. It has been committed to providing high quality application resources for smart TV and TV box users and active community exchanges. And authoritative evaluation of smart TV products.