Many car users seem to be very entangled before making car audio modification: 1. I don't know which audio brand to choose for the sound quality; 2. I don't want to toss the car too much; 3. Worry that the modification will not work. . . . . In fact, car audio modification is not complicated. After choosing the right modification store and audio configuration, everything becomes very simple. This Mazda rider from Kunming finally chose to upgrade the American Harman JBL speakers and MTX speakers after passing the audition experience; the two sets of speakers were directly pushed through the original car host, and the sound quality was also very good. Let's take a look at the modification process: Mazda car audio modification upgrade configuration: Front sound field: American Harman JBL6500C two-way speaker Rear sound field speaker: American MTX265S coaxial speaker Four-door sound insulation: Russian AUTOFUN car sound insulation material Modification shop: Kunming enthusiast car audio modification Configuration analysis: The American Harman JBL audio brand has a very good reputation in the field of home audio and car audio, and the owner is for this brand. After listening to the clear and lively sound quality of the JBL6500C speaker, the owner decisively chose this cost-effective speaker. The back door is equipped with a set of American MTX coaxial speakers, and the bright and crisp sound quality plays a very good auxiliary role. Before installing the horn, soundproof the car door to reduce sheet metal resonance and wind noise intrusion. Making the car door look like a box will help improve the sound quality of the horn. NO1, the upgraded car audio equipment, two sets of cost-effective speakers are directly pushed by the original car host, and the effect is very good. NO2, this is the original door structure, the door sheet metal is relatively thin, and the original door has no sound insulation treatment, sheet metal resonance noise and wind noise intrusion are obvious. NO3, the American Harman JBL6500C two-way speaker is aligned with the original car speaker. In terms of materials and materials, the JBL speaker is more kind, the sound quality is clearer and more thorough, the details are more realistic, and the sound sounds more pleasing. NO4, the US Harman JBL6500C two-way speaker mid-woofer installation process, install a waterproof cover to protect the speaker, and the audio cable is welded; no matter what car model is, it will be carefully taken care of in Kunming enthusiast car audio modification shop. NO5. After the double-layer sound insulation treatment of the front door, the American Harman JBL6500C two-way speaker is installed, the sound is transparent and real, and the thick and full sound quality effect sounds particularly comfortable. NO6. The American MTX265S coaxial speaker is installed in the back door: the hearty and pleasant sound quality brings a new listening experience to the rear. Finally, perform audio debugging and non-destructive restoration of accessories; The sensitivity of these two sets of speakers is very high, and the original car's main engine push effect is also very good; this set of audio modification program is especially suitable for car owners who modify their audio for the first time. At the same time, it also leaves a lot of room for refitting the audio in the future. You can add a power amplifier and bass to bring the audio effect to a higher level. Mazda car audio modification and upgrade completed! end High voltage unarmored cable is a type of electrical cable that is designed to carry high voltage electricity without any armor or protective covering. These cables are typically used in applications where the cable is not exposed to physical damage or environmental hazards. Ruitian Cable CO.,LTD. , https://www.hbruitiancable.com
The construction of a high voltage unarmored cable typically includes a conductor, insulation, and an outer sheath. The conductor is usually made of copper or aluminum and is designed to carry high voltage electricity over long distances. The insulation is made of a high-quality material that is designed to withstand the high voltage and prevent any electrical leakage.
The outer sheath is typically made of a durable material such as PVC or polyethylene and is designed to protect the cable from moisture, chemicals, and other environmental hazards. Unlike armored cables, unarmored cables do not have any additional layers of protection, which makes them more flexible and easier to install.
High voltage unarmored cables are commonly used in applications such as power transmission, distribution, and industrial automation. They are also used in renewable energy applications such as wind and solar power generation.