TMS470PLF221RFPQ1 is TI's ARM7-based MCU, which is specially developed for the development of automotive dashboards. It has 6 stepper motor drivers, which can subdivide the control of six instrument motors at the same time. HET, which can generate very precise timing, cooperate with DMA and multi-buffer serial SPI, can complete the external function design, and takes up very little resources. In addition, the chip has built-in CAN and LIN controller, which is very suitable for car. Development of dashboards. Lerda has developed a high-end automotive dashboard solution based on the TMS470PLF221RFPQ1 with TFT LCD. Scheme picture: Scheme block diagram: 1, the basic requirements of the program specifications: • Working voltage: VCC 1.8~2.5V VIO 4.5~6V • Main frequency: 48MHZ ARM7 • ARM7 core, 16/32 bit RISC command system • Flash: 256KB RAM: 16KB • JTAG encryption module JSM included • 1 channel up to 1Mbps multi-buffered parallel interface, 1 channel SPI interface, 2 channel I2C interface • Built-in 1 way standard CAN and high speed CAN bus interface, 1 channel LIN bus interface • Built-in support for up to 6 stepper motor drives • 22 high-end timers HET1 and 24-channel HET2 • Built-in 16 10-bit ADC1 and 6 10-bit ADC2 • Up to 105 I/O ports • Operating temperature: -40 ° C ~ 125 ° C • Package: LQFP144 2. LCD display part: The key part of this solution is the LCD screen driver. The TMS470PLF221RFPQ1 has an LCDA module inside: External features: A, Power Supply part design B, instrument stepper motor design principle (software and Hardware part) C, CAN / LIN bus circuit design principle (software and hardware) More exciting, please refer to the TFT screen dashboard design Amercia Push Button,America button,Push Buttons,America Standard Arcade Button Guangzhou Ruihong Electronic Technology CO.,Ltd , https://www.callegame.com
