Solid-state capacitors / Motor starting capacitors
Solid - state capacitors are all called: solid - state Aluminum Electrolytic Capacitors.It with the ordinary capacitance (that is, the liquid aluminum electrolytic capacitors) the biggest difference is that use different dielectric material, liquid aluminum capacitor dielectric material as the electrolyte, and solid-state capacitor dielectric material is conductive polymer materials.Solid-state Capacitors / Motor Starting Capacitors
Solid-state capacitors / Motor starting capacitors,Solid-State Capacitors,Solid-State Small Size Capacitors,Solid-State Low Impedance Capacitors,Long Life Solid-State Capacitors YANGZHOU POSITIONING TECH CO., LTD. , https://www.cndingweitech.com
The Klipsch X11-i is an upgraded version of the previous X10. It is the world's smallest and lightest moving iron earphone, but it represents Klipsch's best level. Excellent noise isolation technology and patented oval shape. The earmuffs can bring a very comfortable experience, now let's take a look at the design of this moving iron earphone.
The Klipsch X11-i is an in-ear type mobile iron talkback headset. In addition to its excellent Hi-Fi sound quality, it also has a remote control mode and a directional built-in microphone for easy listening to music or calls. .
The Jasper X11-i uses a 3.5mm universal plug and is gold-plated.
Three buttons on the remote, volume up and down and call button.
The Klipsch X11-i logo is printed on the back.
The X11-i uses a moving iron unit. Because the moving iron unit is small in size, the earphone cavity can be made very thin. This method effectively reduces the area of ​​the ear portion and allows the earphone to be placed in the deeper ear canal portion. The geometry of the ear canal is much simpler than the auricle, and it is round, so a soft silicone sleeve can already provide good sound insulation and leakage prevention.
On the side below the earphone, there is a left and right identification mark. Since the left and right earphones have the same shape, it is necessary to take a look at each time to wear the X11-i.
Open the silicone sleeve and take a closer look at the work of the X11-i. The front end of the earphone cavity is made of metal and the cavity is very slender. This is also due to the structure of the moving iron unit.
Because the earphone design is very slender, the whole earphone can be deeply inserted into the ear canal, and it feels strange to wear it at first.
The cavity of the X11-i is really very slender. Putting the earphone next to the plug will make the earphones almost as small as the plug.
Compared with some common ear-on-ear headphones, it feels more powerful, and the X11-i will look even more petite.
The headset also delivers 5 pairs of different sizes of silicone sleeves, 6.3mm adapters and aerospace adapters.
The X11-i also comes with a fairly strong leather hard case.
The box is fixed by a magnet, and the magnet's suction is also very strong. It is not afraid that the box will be unintentionally opened in the bag every day.
The cavity design of the Jieshi X11-i is relatively slender. It may be a little uncomfortable to insert it into the ear at first. The sisters who try to wear the ear are relatively small, and the ear canal is relatively shallow, so it is obvious that such a small earphone is brought up, but If the boy's ear is relatively large, it will be inconspicuous when taken up. Because the weight of the earphone is very light, the pressure on the ear of this pair of headphones is still very small.
Although the earphone design is very small, but in such a small earphones, it has a very good sound bursting power. At first, the vocals and sound positioning are very good, the low frequency is quite amazing. In addition, the earphones are designed very fine. Long, very light, the burden on the ear is not serious, that is, when you first wear it, you may feel that the silicone sleeve is a bit of an ear. After wearing it for a long time or replacing it with a memory sponge, there is not much foreign body intrusion. .