For full-color LED display, LED lamp bead is its most important component. The quality of LED lamp bead plays an important role in determining the quality of LED display. First of all, LED lamp beads are used in the largest number of full-color LED displays, and there may be thousands or even tens of thousands of LED beads per square meter. Finally, the LED bead directly determines the performance and color saturation and sharpness of the full color LED display. The main indicators of LED lamp quality are: First, full color LED display brightness The brightness of the LED lamp bead determines the brightness of the full-color LED display. The higher the brightness of the LED lamp bead, the greater the margin of current used, which is beneficial to save power consumption and keep the LED lamp bead stable. LED lamp beads have different angle values. When the brightness of the chip is fixed, the smaller the angle, the brighter the LED, but the smaller the viewing angle of the display. Generally, 100-110 degree LED lamp beads should be selected to ensure sufficient viewing angle of the full-color LED display. Second, full color LED display failure rate LED display screen is composed of tens of thousands or even hundreds of thousands of red, green and blue LED lamp beads. The failure rate of the lamp bead will not be higher than one in ten thousand even if it is aged for 72 hours. Third, full color LED display attenuation characteristics The LED bead will slowly decay as the usage time increases. The attenuation speed of LED lamp bead brightness is related to LED chip, auxiliary material and packaging process. In general, after 1000 hours and 20 milliamperes of normal temperature lighting test, the attenuation of red LED lamp beads should be less than 7%, and the attenuation of blue and green LED lamp beads should be less than 10%. The consistency of red, green and blue attenuation The white balance of the full-color LED display has a great influence on the future, which in turn affects the display fidelity of the display. Fourth, LED display anti-static ability Since the LED lamp bead is a semiconductor device, it is sensitive to static electricity and easily causes electrostatic failure, so the antistatic capability is crucial to the life of the LED display. In general, the human body electrostatic mode test failure voltage of the LED lamp bead should not be lower than 2000V. Edit: Cedar
Auto spare lamp kits are extra lamp pieces that can be used to replace a piece that broken. There are many different bulbs and fuses in one spare lamp kits. For example, there are one H4 for headlight, one S25 singe filament for signal light, one dual filament S25 for stop light, one G18.5 for truck light or license plate light, one T10 for interior light or side indicators light and two different types of fuses that can replace the burned fuse. The customers will review what specs their own vehicle have and choose which to buy. Having a spare lamp in the car is like buy a insurance, because every light on the car has its specific purpose, which means any broken bulb might put the driver and others in a very dangerous situation. Highly recommend have one kits in the car.
Auto Spare Lamp Kits Auto Spare Lamp Kits,Auto Bulb Halogen Parking Lamps,Car LED Auto Light,Super White Headlight Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com