Flexible Printed Circuit boards derive their
name for their ability to enable the circuitry to be designed to fit the
electronic device or product, as opposed to building the device to conform with
the Circuit Board . Flex boards are characterized by a distinctly patterned
printed circuitry and component arrangement highlighted by a malleable base
material.
Exploring the Many Advantages of Flex Circuit Boards
Flexible Printed Circuit Boards offer a
number of potential benefits including:
• Saving
Space: Flex PCB design requires only about 10 percent of the space and
weight of a wired circuit board assembly, offering greater installation and
packaging freedom. The inherent flexibility also permits tighter bend
capabilities.
• Maximum
Reliability: A flexible Printed Circuit Board requires fewer interconnects,
which in turn require fewer contact crimps, connectors and solder joints.
Simply put, a Flexible PCB Board does not contain as many potential sources for
failure, which enhances their reliability.
• Enhanced
Capabilities: The flexible PCB is compatible with virtually any type of
connector or component and works well with options such as ZIP connectors. They
also perform extremely well in extreme temperatures and offer superior
resistance to radiation and chemicals.
• Cost
Savings: Cost-saving advantages of flexible printed circuits include
reduced material and packaging requirements, lower parts replacement costs and
a reduction in assembly errors that could otherwise result in the need for
repairs.
All of these benefits make flex circuit
boards ideally suited for a wide range of applications in industries such as
Military, Transportation, Medical, Consumer Electronics, Automotive, Aerospace,
Communications and Industrial.
At BentePCB, we specialize in the fabrication
and assembly of flexible printed circuit products for use in the manufacturing
of medical devices and various types of telecommunication and industrial
equipment. Our Custom PCB manufacturing capabilities allow us to develop and
produce a top-performing flex PCB that meets your unique requirements. We can
also work with you to produce a custom flex PCB Prototype that will
significantly improve your prospects of a successful project outcome. Detailed
capabilities please refer to the following form.
Item
Capability
Quality
Grade
Standard
IPC 2
Number
of Layers
1 - 8layers
Build
Time
2days -
30days
Material
DuPont
PI, Domestic Shengyi PI
Board
Size
Min
6*6mm, Max 406*610mm
Board
Thickness
0.08mm
- 0.6mm
Finished
board thickness tolerance
0.085mm≦board
thickness<0.4mm
±2mil(±0.04m)
Outer
Layer Base Copper Thickness
0.3oz -
1.0oz
Min
Tracing/Spacing
2.5mil/2.5mil
Min.
Annular Ring
4mil
Min.
Drilling Hole Diameter
8mil(0.2mm)
Min.
hole size---Drilling
8mil(0.2mm)
Min.
finished via diameter
6mil(0.15mm)
Tolerance
of dimension
3mil(0.076
mm)
Solder
Mask Sides
As per
the file
Solder
Mask Color
Green,
White, Blue, Black, Red, Yellow
Solder-stop
coating---Soldermask oil
Green,
White, Blue, Black, Red, Yellow
Solder-stop
coating---Coverlay
PI and
PET film
Silkscreen
Sides
As per
the file
Silkscreen
Color
White,
Black, Yellow
Surface
Finish
OSP
HASL - Hot Air Solder Leveling
Flash Gold (Soft Gold)
Gold Plated
Immersion Silver
Immersion Tin
Other
Techniques
Peelable
solder mask
About Us:
BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and flexible PCB mass production. The company was established on 2011.
Why Us?
UL (E492586), ISO9001, ISO14001, TS16949, RoHS certified.
Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):
Factory Tour:
Exhibition:
We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.
Delivery:
BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
FAQ:
Q1: What does BentePCB need for a customized PCB order?
We don`t just sell PCBs .We sell sleep.
Flexible PCB Flexible PCB, Flexible PCB Prototype, Flexible Circuit Board, Flexible Printed Circuit Shenzhen Bente Circuit Limited , http://www.bentegroup.com
With strong ability for explosion proof light, Nibbe also has some non-explosion proof light, such as LED Flood Light, LED Hay Bay Light, LED Street Light. Our Flood light has a power range from 10W-400W.
Replaceable LED street bulb NB-SP90
Input Voltage: AC 85~264V
Power Consumption: 30W
Color Rendering Index: Ra >80
Luminous efficiency: 80lm/w
Working Temperature: -30oC~40oC
Life Expectancy: >50, 000 Hrs
Protection Grade: IP60
Lamp Base: E40
The Dimensions: Dia. 90× 275mm
Certification: CE
Specification:
1 All aluminum housing for the heat dissipating, greatly extending the life span of lighting source.
2 Free of dust and water, suitable for outdoor.
3 Processed by painting treatment and anodic oxidation, solid and corrosion resisting.
4 Waterproof: IP65
Applied to high way, main road, minor road, city streets, pavement, squares, schools, parks, yards, residential areas, factories, oil fields, oil refineries, power plants, gas stations, and other places where light is needed.
The light can be used at ease in the following places:
A. Places where ambient temperature is between -40 and 40
B. Places below 2000m high
C. Places where relative humidity is less than 90% (at 25)
28W/36W E40 High Power LED Street/Road Light
2. Characteristics of Product
(1) High efficient LED module is adopted as light source and most advanced electrical technology is applied. This enables low power consumption, efficient light-emitting and instant lighting at the same time.
(2) The light has unique structure; Simple and compact but ideal for heat diffusion (patented), tight enough for sealing (waterproof and dust prevention of IP65) and tough against shocks and corrosions. This assures long service life of the light.
(3) By unique optical design, light irradiation range is wide and illumination intensity is high.
(4) There are various mounting options and mounting is very easy.
28W/36W LED Street/Road Light
4. How to mount and use
(1) Fix with 60mm pole.
(2) After having fixed the light, connect cable of the light with cable from AC power source. 0.5m long triple core cable of 10mm diameter is equipped with the light. There are triple core lines in the cable of the light and markings on the lines, indicating live line (L), neutral line (N) and ground line (E). Connect each line rightly with line in the cable from the AC power source, respectively.
(3) Switch on the light. It will shine instantly.
5. Attentions
(1) Before mounting and use of the light, read through this Instructions and check whether voltage of power source conforms to that required for the light. If not, it may cause breakdown of the light.
(2) Make surface of the light case and lens clean to ensure light transmittance and heat diffusion.
(3) Be careful not to have the light case contacted to hard materials in order to avoid scratches.
(4) Do not let amateur mount the light.
(5) Never neglect to ground the light. It is important to ensure security of power source and protection from lightening surge of the light.
(6) Ambient temperature for the light should be in the range from -50 to 40. When it exceeds 40, make forceful ventilation to accelerate heat diffusion.
(7) Repairs and maintenance
I) Check periodically elasticity of sealing materials. In case they lose elasticity due to aging, replace them with those of exactly same specifications (both size and hardness). Alternative materials may not be used.
II) Conduct periodically insulation resistance test with 500V Megger so that insulation resistance does not get lower than 2MΩ .
III) In maintenance work, take care of the surface of flameproof enclosures. As the surface may not have damages and corrosion, it was coated with rust-proof oil 204-1 in assembly. Do not soil the surface or damage the sealed part.
(8) Safety cautions
28W/36W E40 High Power LED Street/Road Light
28W/36W E40 High Power LED Street/Road Light
With strong ability for explosion proof light, Nibbe also has some non-explosion proof light, such as LED Flood Light, LED Hay Bay Light, LED Street Light. Our Flood light has a power range from 10W-400W.
Replaceable LED street bulb NB-SP90
Input Voltage: AC 85~264V
Power Consumption: 30W
Color Rendering Index: Ra >80
Luminous efficiency: 80lm/w
Working Temperature: -30oC~40oC
Life Expectancy: >50, 000 Hrs
Protection Grade: IP60
Lamp Base: E40
The Dimensions: Dia. 90× 275mm
Certification: CE
Specification:
1 All aluminum housing for the heat dissipating, greatly extending the life span of lighting source.
2 Free of dust and water, suitable for outdoor.
3 Processed by painting treatment and anodic oxidation, solid and corrosion resisting.
4 Waterproof: IP65
Applied to high way, main road, minor road, city streets, pavement, squares, schools, parks, yards, residential areas, factories, oil fields, oil refineries, power plants, gas stations, and other places where light is needed.
The light can be used at ease in the following places:
A. Places where ambient temperature is between -40 and 40
B. Places below 2000m high
C. Places where relative humidity is less than 90% (at 25)
28W/36W E40 High Power LED Street/Road Light
2. Characteristics of Product
(1) High efficient LED module is adopted as light source and most advanced electrical technology is applied. This enables low power consumption, efficient light-emitting and instant lighting at the same time.
(2) The light has unique structure; Simple and compact but ideal for heat diffusion (patented), tight enough for sealing (waterproof and dust prevention of IP65) and tough against shocks and corrosions. This assures long service life of the light.
(3) By unique optical design, light irradiation range is wide and illumination intensity is high.
(4) There are various mounting options and mounting is very easy.
28W/36W LED Street/Road Light
4. How to mount and use
(1) Fix with 60mm pole.
(2) After having fixed the light, connect cable of the light with cable from AC power source. 0.5m long triple core cable of 10mm diameter is equipped with the light. There are triple core lines in the cable of the light and markings on the lines, indicating live line (L), neutral line (N) and ground line (E). Connect each line rightly with line in the cable from the AC power source, respectively.
(3) Switch on the light. It will shine instantly.
5. Attentions
(1) Before mounting and use of the light, read through this Instructions and check whether voltage of power source conforms to that required for the light. If not, it may cause breakdown of the light.
(2) Make surface of the light case and lens clean to ensure light transmittance and heat diffusion.
(3) Be careful not to have the light case contacted to hard materials in order to avoid scratches.
(4) Do not let amateur mount the light.
(5) Never neglect to ground the light. It is important to ensure security of power source and protection from lightening surge of the light.
(6) Ambient temperature for the light should be in the range from -50 to 40. When it exceeds 40, make forceful ventilation to accelerate heat diffusion.
(7) Repairs and maintenance
I) Check periodically elasticity of sealing materials. In case they lose elasticity due to aging, replace them with those of exactly same specifications (both size and hardness). Alternative materials may not be used.
II) Conduct periodically insulation resistance test with 500V Megger so that insulation resistance does not get lower than 2MΩ .
III) In maintenance work, take care of the surface of flameproof enclosures. As the surface may not have damages and corrosion, it was coated with rust-proof oil 204-1 in assembly. Do not soil the surface or damage the sealed part.
(8) Safety cautions
28W/36W E40 High Power LED Street/Road Light
Flexible PCB
BentePCB:
A Leading Flex PCB Manufacturer for More Than a Decade
Lead Free HASL
ENIG - Electroless Nickle/Immersion Gold
Gold fingers
Stiffener (only for PI/FR4 substrate)
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Model NO.: EPL90
Category: High Power LED Street Light
Lighting Source: COB LED
Power Consumption: 200W
Beam Angle: 120
Power Factor: 0.9
Corrosion-Proof Grade: Wf1
Installation Height: 10~15m
Dimension: 340X400X121mm
Weight: 6kg
Trademark: NIBBE
Specification: CE, RoHS
Origin: Shenzhen, China
HS Code: 940540900
Model NO.: EPL90
Category: High Power LED Street Light
Lighting Source: COB LED
Power Consumption: 200W
Beam Angle: 120
Power Factor: 0.9
Corrosion-Proof Grade: Wf1
Installation Height: 10~15m
Dimension: 340X400X121mm
Weight: 6kg
Trademark: NIBBE
Specification: CE, RoHS
Origin: Shenzhen, China
HS Code: 940540900
28W/36W E40 High Power LED Street/Road Light