Whether you are designing a processing system for automotive, IoT, or VR/AR applications, MIPI-compliant sensors and displays are essential for scalability, high noise immunity, and high jitter tolerance. In addition, their high speed and low power modes are key to achieving the best power performance balance. However, using an external bridge chip or PHY can increase bill of materials (BOM) costs and can even cause compliance issues in certain applications. To do this, the external MIPI bridge can be removed with MIPI-compliant processing platforms such as Zynq UltraScale+ MPSoC and Kintex UltraScale+ FPGAs that integrate 1.5Gb/s MIPI standard I/O. Xilinx UltraScale+ devices offer: MIPI D-PHY local operation up to 1.5Gb/s Supports scalable processing power of up to 4 ARM Cortex®-A53 processors Industry's best unit power performance ratio 16nm programmable logic
Red IDC Connector:IDC connector Automotive Connector is a kind of component that electronic engineering and technical personnel often contact. Its function is very simple: in the circuit is blocked or isolated between the circuit, set up a bridge of communication, so that the current flow, so that the circuit to achieve the intended function. The form and structure of automobile connector are changeable. It is mainly composed of four basic structural components: contact, shell (depending on the variety) and insulator. Red IDC Connector ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com