The introduction of reading: financing difficulty, cost increase, labor shortage and other multiple factors under the overlay, resulting in Liuzhou low-voltage electrical companies are facing a serious crisis of survival. The macroeconomic environment of China's small and medium-sized electrical companies that have long relied on low-cost competition strategies will change. Economic development models that have long relied on low-cost production factors will also be unable to sustain them. This will undoubtedly create a huge market push for economic restructuring.

As the “City of China’s Electrical Appliances”, low-voltage electrical appliances in Liushi City have accounted for more than 60% of the country’s market share. Both the industry scale and the product category are among the highest in China.

However, with the obvious acceleration of the pace of economic globalization in recent years, the internationalization of the domestic market, the localization of international competition, and the increase in the cost of raw materials and energy, the low-voltage electrical appliance industry in the “China Electric Capital” is facing a trend of white-hot competition. A considerable number of low-voltage electrical companies have entered the predicament of survival and development. Especially in this year's financing difficulties, cost increases, labor shortages and other multiple factors superimposed, resulting in Liuzhou low-voltage electrical companies are facing a serious crisis of survival.

In an in-depth analysis of the external causes of the crisis, we discovered that due to over-reliance on resources and lack of core technologies, the macroeconomic environment of China's small and medium-sized electrical companies that have long relied on low-cost competition strategies will change. Economic development that has long relied on cheap production factors The model will also be unable to maintain, which will undoubtedly form a huge market thrust for economic transformation.

In addition to recognizing the changes in the macroeconomic environment, we must solve the problems of the survival and development of the low-voltage electrical industry and promote its sustained, healthy and rapid development. We must also face up to the various contradictions accumulated in the low-voltage electrical industry for a long time, so as to fundamentally improve small and medium-sized appliances. The company's ability to withstand various risks.

All along, the industrial structure and product structure of the low-voltage electrical appliance industry are irrational. At present, the market is still dominated by the second generation of traditional products. There are few third-generation products, and the fourth-generation products are rare. The similarities, quality, and grades of most products in the industry have made the market competition increasingly fierce, and the phenomenon of price-fixing dumping is difficult to contain, and it has become increasingly fierce. At the same time, the lack of business management and international marketing capabilities, the lack of independent innovation capability, the lack of high-tech talent, and the severe shortage of scientific research funds have also become obstacles for small and medium-sized electrical companies.

Therefore, in response to this crisis, in addition to paying close attention to the macroeconomic situation, enterprises must ultimately rely on technological innovation, structural adjustment, transformation and development, and upgrading their own quality to achieve self-help. The author suggests that in the future, small and medium-sized electrical enterprises must not only implement information, intensive, automation, and mechanization strategies, but also strengthen technological innovation, replace labor force by updating equipment and automation, and increase labor productivity. At the same time, we must also resolve "high costs" through enterprise transformation, industrial chain integration, business model innovation, and technological innovation. In addition, companies must also be people-centered, gradually increase their salaries, steadily improve their welfare, care for and respect employees, strengthen skills training, establish a harmonious labor relationship, change the mentality of employees passing through, form a community of destiny, and reduce the loss of employees.

The author believes that the survival crisis encountered by the small and medium-sized electrical enterprises is expected to become the "inflection point" for the transformation of enterprises. I believe that as long as they actively channel and respond appropriately, they will certainly become a powerful opportunity for the transformation of China's SMEs.

LCD Power Meter Socket

Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Built-in 3.6V rechargeable Batteries ( . The purpose of the batteries is to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,
press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from
one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current power which ranges in 0.0W 〜 9999W. LCD on third line displays the current electricity costs which ranges in O.Ocost 〜 9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which
means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000KWH 〜 9999KWH without other figures. LCD on third line displays"DAY"- "1 'Will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untill the maximal cumulative time of 9999 days.
Mode 3: TimeA^bltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V 〜 9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ 〜 9999Hz without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.LCD on second line displays load current which ranges in 0.0000A 〜 9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 LOOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 dones. LCD on
second line displays the minimum power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: Time/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the''OVERLOAD[ with booming noise to warn the users,( 1918928,selectable choice)
Supplemental informations:
1: Except [OVERLOAD[ interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&"Down" are in no function under un-setting mode.
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device
has entered the setting mode. After that, press FUNCTION for swithing , then press "UP"and "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.

LCD Display Power Meter Socket,Power Meter Plug Outlet,Electricity Usage Monitor Socket,LCD Energy Power Meter Socket,Digital LCD Power Meter Socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com