Type SHD-GC rubber mining cable with UL MSHA Certification  Type SHD-GC rubber mining cable with UL MSHA Certification  6.2Mm Ribbon Connector,Wire-To-Wire Connector,Ket Connectors,6.2Mm Ribbon Connectors YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com
APPLICATION
CONSTUCTION
CONDUCTORS: Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B-33/B-172.
SEPARATOR: A separator tape is applied between the conductor and insulation to facilitate stripping.
INSULATION: Black flame resistant, Ethylene Propylene Rubber (EPR), ozone, oil, water solvents, corrosive, and abrasion resistant per ICEA S-75-381/NEMA WC-58.
SHIELD SEPARATOR: An SBR tape is applied to each primary phase's insulation, 1/2 overlap with adhesive side up.CONDUCTOR SHIELD: Tin coated, soft drawn, annealed, copper braid shield (60% min. phase coverage), duplexes with nylon textile buffer colour code tracer (40% max. phase coverage).
COLOUR CODE: Red, Black, Blue
GROUND WIRES: Tin coated, uninsulated, soft drawn, annealed, rope bunched, flexible lay construction, per ASTM B-172 and B-33.
GROUND CHECK: Yellow, flame resistant, High Durometer Ethylene Propylene Rubber (HD EPR) insulation over tin coated, rope bunched, flexible lay copper.
CABLING: Three insulated shielded conductors are assembled in a helical configuration with two non-insulated ground wires and one yellow HD EPR insulated ground check. A woven nylon polyester binder is served over the entire cable assembly for added core stability
JacketEINFORCEMENT: A woven nylon polyester binder will be served between the inner andouter jacket layers for improved mechanical integrity.
JACKET: Mold cured, extra heavy-duty, pure integral fill, dual layer, flame resistant, thermosetting Chlorinated Polyethylene (CPE) jacket. Alternate jacket colours and reflective stripes available in High Tensile Rhino-X Jacket (consult with factory).
Standard freference
Company information
HeBei huatong wires&cables Group Co.,ltd.
which founded in1993,covers 15,000 square meters.With 400 sets of manufacturing machines and 200 pieces of equipment available for testing and inspecting,the company's annual mannufacturi-ng capacity has reached 450 minllionUS dollars.
The enterprise has adapted international a-dvanced mannagement standards by fully implementing the accreditation of ISO9001Quality con-trol system, ISO1004 Envrionment management system,and OHSAS18001 Occupational health and safety management system.
Huatong's products which consist of 15 series of cables and tens of thousands of specifications are widely used in different  key  national projects and industries .Our products are well liked by domestic and international customers that they have been exported to various countries and areas including the US,Netherlands, Italy,Russia,UK,Australia,Ethiopia,Ghaha,congo,Middle East ,and Southeast Asia.
\
FQ
(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.
(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week.Â
APPLICATION
CONSTUCTION
CONDUCTORS: Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B-33/B-172.
SEPARATOR: A separator tape is applied between the conductor and insulation to facilitate stripping.
INSULATION: Black flame resistant, Ethylene Propylene Rubber (EPR), ozone, oil, water solvents, corrosive, and abrasion resistant per ICEA S-75-381/NEMA WC-58.
SHIELD SEPARATOR: An SBR tape is applied to each primary phase's insulation, 1/2 overlap with adhesive side up.CONDUCTOR SHIELD: Tin coated, soft drawn, annealed, copper braid shield (60% min. phase coverage), duplexes with nylon textile buffer colour code tracer (40% max. phase coverage).
COLOUR CODE: Red, Black, Blue
GROUND WIRES: Tin coated, uninsulated, soft drawn, annealed, rope bunched, flexible lay construction, per ASTM B-172 and B-33.
GROUND CHECK: Yellow, flame resistant, High Durometer Ethylene Propylene Rubber (HD EPR) insulation over tin coated, rope bunched, flexible lay copper.
CABLING: Three insulated shielded conductors are assembled in a helical configuration with two non-insulated ground wires and one yellow HD EPR insulated ground check. A woven nylon polyester binder is served over the entire cable assembly for added core stability
JacketEINFORCEMENT: A woven nylon polyester binder will be served between the inner andouter jacket layers for improved mechanical integrity.
JACKET: Mold cured, extra heavy-duty, pure integral fill, dual layer, flame resistant, thermosetting Chlorinated Polyethylene (CPE) jacket. Alternate jacket colours and reflective stripes available in High Tensile Rhino-X Jacket (consult with factory).
Standard freference
Company information
HeBei huatong wires&cables Group Co.,ltd.
which founded in1993,covers 15,000 square meters.With 400 sets of manufacturing machines and 200 pieces of equipment available for testing and inspecting,the company's annual mannufacturi-ng capacity has reached 450 minllionUS dollars.
The enterprise has adapted international a-dvanced mannagement standards by fully implementing the accreditation of ISO9001Quality con-trol system, ISO1004 Envrionment management system,and OHSAS18001 Occupational health and safety management system.
Huatong's products which consist of 15 series of cables and tens of thousands of specifications are widely used in different  key  national projects and industries .Our products are well liked by domestic and international customers that they have been exported to various countries and areas including the US,Netherlands, Italy,Russia,UK,Australia,Ethiopia,Ghaha,congo,Middle East ,and Southeast Asia.\
FQ
(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.
(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week.Â
Model NO.: mining cable
Wire Core Material: Tinned Wire
Certification: ISO, CCC, RoHS, UL
Model: Shd-Gc
Brand: Rneda
Color: White Red Black
Core: 3
Voltage Rated: 2kv
Trademark: RNEDA
Transport Package: Drum
Specification: 2/0 awg
Origin: China
HS Code: 8544492100
Model NO.: mining cable
Wire Core Material: Tinned Wire
Certification: ISO, CCC, RoHS, UL
Model: Shd-Gc
Brand: Rneda
Color: White Red Black
Core: 3
Voltage Rated: 2kv
Trademark: RNEDA
Transport Package: Drum
Specification: 2/0 awg
Origin: China
HS Code: 8544492100
For use with mobile, reeling, or stationary mining equipment, continuous mining machines, or longwall loading machines, blast hole drillers, and heavy-duty trailing cable where maximum protection is required.
Type SHD-GC is also an excellent choice for shovels, draglines, dredges, cranes and marine ships to shore power supply anytime extra durability is required.
For use with mobile, reeling, or stationary mining equipment, continuous mining machines, or longwall loading machines, blast hole drillers, and heavy-duty trailing cable where maximum protection is required.
Type SHD-GC is also an excellent choice for shovels, draglines, dredges, cranes and marine ships to shore power supply anytime extra durability is required.